QOS/QOS PROFILE CONFIGURATION
23 GUIDE
Configuring Traffic
Policing and LR
Network Diagram Figure 62 Network diagram for traffic policing and LR configuration
To the router
PC 1
192.168.0.1
The R&D department
Eth1/0/1 Eth1/0/2
Switch
The Marketing
department
Networking and A company uses a switch (a Switch 5500 in this example) to interconnect all the Configuration departments. PC 1 with IP address 192.168.0.1 belongs to the R&D department Requirements and is connected to Ethernet 1/0/1 of the switch; the marketing department is
connected to Ethernet 1/0/2 of the switch.
Configure traffic policing and LR to satisfy the following requirements:
■Limit the total outbound traffic rate of the marketing department and the R&D department to 16000 kbps; drop the packets exceeding the rate limit.
■Limit the rate of the IP packets that PC 1 of the R&D department sends out to 8000 kbps; drop the packets exceeding the rate limit.
Applicable Products
Product series | Software version | Hardware version |
|
|
|
Switch 5500 | Release V03.02.04 | All versions |
Switch 5500G | Release V03.02.04 | All versions |
Switch 4500 | Release V03.03.00 | All versions |
Switch 4210 | Release V03.01.00 | All versions |
|
|
|
n The Switch 4210 does not support traffic policing.
