3Com 5500G, 4210, 4200G manual SSH client configuration interface

Configuring the Switch to Act as the SSH Server and Use RSA Authentication 289

Figure 97 SSH client configuration interface 2

Click Browse... to bring up the file selection window, navigate to the private key file and click OK.

4In the window shown in Figure 97, click Open. If the connection is normal, you will be prompted to enter the username.

Complete Configuration ■ Configure the SSH server

#

interface Vlan-interface1

ip address 192.168.0.1 255.255.255.0

#

ssh user client001 assign rsa-key Switch001 ssh user client001 authentication-type rsa ssh user client001 service-type stelnet

#

user-interface vty 0 4 authentication-mode scheme user privilege level 3 protocol inbound ssh

Precautions When acting as an SSH server, the Switch 4210 does not support configuring the client host public key by importing from a public key file. You need to configure it manually.