Cluster Configuration in Real Networking 255
| The member switches: |
|
|
|
| ■ Member switch Switch B is connected to Switch D through Ethernet 1/0/2. | |||
| ■ Switch B is connected to Switch E through Ethernet 1/0/3. | |||
| ■ Switch B is connected to Switch F through Ethernet 1/0/4. | |||
n | ■ Switch A, Switch B and Switch C are usually the Switch 5500 and Switch | |||
5500G. |
|
|
| |
| ■ Switch D, Switch E and Switch F can be Switch 5500, Switch 5500Gs, and | |||
| Switch 4210. |
|
|
|
Applicable Products |
|
|
|
|
| Product series | Software version | Hardware version | |
|
|
|
|
|
| Switch 5500 | Release V03.02.04 | All versions | |
| Switch 5500G | Release V03.02.04 | All versions | |
| Switch 4500 | Release V03.03.00 | All versions | |
| Switch 4210 | Release V03.01.00 | All versions | |
|
|
|
|
|
Configuration Procedure
1Configure the member devices (taking Switch B as an example)
# Enable NDP globally.
<3Com>
[3Com] ndp enable
#Enable NDP on Ethernet 1/0/1, Ethernet 1/0/2, Ethernet1/0/3, and Ethernet1/0/4.
[3Com] interface Ethernet 1/0/1
# Enable NTDP globally.
[3Com] ntdp enable
#Enable NTDP on Ethernet 1/0/1, Ethernet 1/0/2, Ethernet1/0/3, and Ethernet1/0/4.
[3Com] interface Ethernet 1/0/1