250CHAPTER 27: CLUSTER CONFIGURATION GUIDE
[3Com] cluster
#Configure a private IP address pool for a cluster. The IP address pool contains six IP addresses, starting from 172.16.0.1.
# Name and build a cluster.
# Add the two switches attached to the management device to the cluster.
# Set the holdtime of member device information to 100 seconds.
# Set the interval between sending handshake packets to 10 seconds.
# Configure
#Configure the shared FTP server, TFTP server, logging host and SNMP host for the cluster.
3Perform the following operations on the member devices (taking one member as an example)
After the devices attached to the management device are added to the cluster, perform the following operations on the member devices.
# Connect the member device to the remote FTP server shared by the cluster.
<aaa_1.3Com> ftp cluster
# Download file aaa.txt from the shared TFTP server to the member device.
<aaa_1.3Com> tftp cluster get aaa.txt
# Upload file bbb.txt from the member device to the shared TFTP server.
<aaa_1.3Com> tftp cluster put bbb.txt