268CHAPTER 30:
#For SNMPv3, set the SNMPv3 group and user, set the security level to authentication with privacy, authentication protocol to
[3Com]
[3Com]
#Configure the IP address of
[3Com] vlan 2
[3Com] interface
#Enable the sending of Traps to the NMS with an IP address of 10.10.10.1, using public as the community name.
[3Com]
[3Com]
[3Com]
[3Com]
[3Com]
Configuring the NMS
The Switch 5500 supports 3Com’s network management products. SNMPv3 adopts username and password authentication. When you use 3Com’s network management products, you need to set usernames and choose the security level. For each security level, you need to set authorization mode, authorization password, privacy mode, privacy password, and so on. In addition, you need to set timeout time and maximum retry times.
You can query and configure an Ethernet switch through the NMS.
Complete Configuration #
| |
community read public | |
community write private | |
group v3 managev3group privacy | |
5000 params | securityname public |
de md5 passmd5
Precautions