3Com 4210, 5500G, 4200G manual Vlan Interface Vlan-interface1 Ip address 1.1.1.1

310CHAPTER 33: FTP AND TFTP CONFIGURATION GUIDE

■Configure the TFTP client (the switch):

#Assign IP address 1.1.1.1/16 to VLAN-interface 1. (You can log in to the switch through the Console port. For detailed information, see “Logging in through the Console Port” in the Configuration Guide for your product.)

<3Com>

<3Com> system-view

[3Com] interface Vlan-interface 1 [3Com-Vlan-interface1] ip address 1.1.1.1 16

[3Com-Vlan-interface1] return

#Download the switch application named switch.bin from the TFTP server to the switch, and upload the switch configuration file named config.cfg to the TFTP server.

<3Com> tftp 2.2.2.2 get switch.bin switch.bin

<3Com> tftp 2.2.2.2 put config.cfg config.cfg

#Use the boot boot-loadercommand to specify the downloaded file to be the startup file for next startup of the switch and restart the switch to complete the switch application upgrade.

<3Com> boot boot-loader switch.bin

<3Com> reboot

Complete Configuration Configure the switch

#

vlan 1

#

interface Vlan-interface1

ip address 1.1.1.1 255.255.0.0

Precautions ■ If the free Flash memory of the switch is not enough for downloading the application file from the TFTP server, remove those unused applications from the Flash memory before downloading the file.

■It is not recommended to directly remove applications in use. If removing some applications in use is a must to get enough space, you can use the BootROM menu to remove them.