3Com 5500 Requirements Applicable Products, # Set the baud rate of the console port to 19200 bps

16CHAPTER 1: LOGIN CONFIGURATION GUIDE

Network Diagram Figure 2 Telneting to the switch to configure console login

Ethernet1/0/1

Ethernet

User PC running Telnet

Networking and As shown in Figure 2, telnet to the switch to configure console login. The current Configuration user level is manage level (level 3).

Requirements

Applicable Products

Product series	Software version	Hardware version
Switch 5500	Release V03.02.04	All versions
Switch 5500G	Release V03.02.04	All versions
Switch 4500	Release V03.03.00	All versions
Switch 4210	Release V03.01.00	All versions

Configuration Procedure ■ Common configuration for console login

# Specify the level of commands accessible to the AUX 0 user interface to 2.

[3Com] user-interface aux 0

[3Com-ui-aux0] user privilege level 2

# Set the baud rate of the console port to 19200 bps.

[3Com-ui-aux0] speed 19200

#Set the number of lines that can be viewed on the screen of the AUX 0 user to 30.

[3Com-ui-aux0] screen-length 30

# Set the history command buffer size to 20 for AUX 0.

[3Com-ui-aux0] history-command max-size 20

# Set the idle-timeout time of AUX 0 to 6 minutes.

[3Com-ui-aux0] idle-timeout 6

■Configure the authentication mode for console login