Cluster Configuration in Real Networking 257
[3Com] ntdp timer
#Set the delay for a port of a member device to forward topology collection request to 20 ms.
[3Com] ntdp timer
# Set the topology collection interval to three minutes.
[3Com] ntdp timer 3
# Enable the cluster function.
[3Com] cluster enable
# Enter cluster view.
[3Com] cluster
#Configure a private IP address pool for a cluster. The IP address pool contains six IP addresses, starting from 172.16.0.1.
# Name and build a cluster.
# Set the holdtime of member device information to 100 seconds.
# Set the interval between sending handshake packets to 10 seconds.
# Configure the TFTP server and SNMP NMS shared by the cluster.
[aaa_0.3Com-cluster] tftp-server 10.1.1.15
[aaa_0.3Com-cluster] snmp-host 10.1.1.16
3Perform the following operations on the member devices (taking one member as an example):
After the devices attached to the management device are added to the cluster, perform the following operations on the member devices.
# Download file aaa.txt from the shared TFTP server to the member device.
<aaa_1.3Com> tftp cluster get aaa.txt
# Upload file bbb.txt from the member device to the shared TFTP server.
<aaa_1.3Com> tftp cluster put bbb.txt