280CHAPTER 32: SSH CONFIGURATION GUIDE
#Set the authentication mode for the user interfaces to AAA.
[3Com]
# Enable the user interfaces to support SSH.
#Create local user client001, and set the authentication password to abc, protocol type to SSH, and command privilege level to 3 for the user.
[3Com]
# Specify the authentication method of user client001 as password.
[3Com] ssh user client001
■Configure the SSH client
# Configure an IP address (192.168.0.2 in this case) for the SSH client.
This IP address and that of the VLAN interface on the switch must be in the same network segment.
# Configure the SSH client software to establish a connection to the SSH server.