Configuring PIM-DM plus IGMP 157
Configuration Procedure Configuring the interface IP addresses and unicast routing protocol for each switch
Configure the IP address and subnet mask for each interface as per Figure 40. The detailed configuration steps are omitted here.
Configure OSPF for interoperation among the switches in the
Enabling IP multicast routing and enabling
#Enable IP multicast routing on Switch A, enable
<SwitchA>
[SwitchA] multicast
[SwitchA] interface
The configuration on Switch B and Switch C is similar to the configuration on
Switch A.
# Enable multicast routing on Switch D, and enable
<SwitchD>
[SwitchD] multicast
[SwitchD] interface
Verifying the configuration
Carry out the display pim neighbor command to view the PIM neighboring relationships among the switches. For example:
# View the PIM neighboring relationships on Switch D.
[SwitchD] display pim neighbor |
|
| |
Neighbor’s Address | Interface Name | Uptime | Expires |
192.168.1.1 | 00:47:08 | 00:01:39 | |
192.168.2.1 | 00:48:05 | 00:01:29 | |
192.168.3.1 | 00:49:08 | 00:01:34 | |
