3Com 4210, 5500G, 4200G manual Displaying the Time Stamp with the UTC Time Zone, Precautions None

318CHAPTER 34: INFORMATION CENTER CONFIGURATION GUIDE

info-center source IP channel 0 trap state off

undo info-center source default channel 0

Precautions None

Displaying the Time

Stamp with the UTC

Time Zone

Network Diagram Figure 109	Network diagram for displaying the time stamp with the UTC time zone
	Network
Switch	Log host

Networking and

Configuration

Requirements

Applicable Products

■The switch is in the time zone of GMT+ 08:00:00.

■The time stamp format of output log information is date.

■UTC time zone will be added to the output information of the information center.

Product series	Software version	Hardware version
Switch 5500	Release V03.02.04	All versions
Switch 5500G	Release V03.02.04	All versions
Switch 4500	Release V03.03.00	All versions
Switch 4210	Release V03.01.00	All versions

Configuration Procedure # Name the local time zone z8 and set it to eight hours ahead of UTC time.

<3Com> clock timezone z8 add 08:00:00

# Set the time stamp format of output log information to date.

<3Com> system-view

[3Com] info-center timestamp loghost date

# Configure to add UTC time to the output information of the information center.

[3Com] info-center timestamp utc

Complete Configuration #

info-center timestamp utc

Precautions None