224CHAPTER 23: QOS/QOS PROFILE CONFIGURATION GUIDE
#Enable 802.1x.
| [3Com] dot1x |
| [3Com] dot1x interface Ethernet 1/0/1 |
Complete Configuration | # |
| dot1x |
| # |
| radius scheme system |
| radius scheme radius1 |
| |
| primary authentication 10.11.1.1 |
| primary accounting 10.11.1.2 |
| secondary authentication 10.11.1.2 |
| secondary accounting 10.11.1.1 |
| key authentication money |
| key accounting money |
| |
| # |
| domain system |
| domain test.net |
| scheme |
| # |
| acl number 3000 |
| rule 0 permit IP |
| # |
| |
| |
| # |
| interface Ethernet1/0/1 |
| dot1x |
| # |
Precautions | Note that: |
| ■ A QoS profile can be applied manually or dynamically. You can use the apply |
| |
| You can also combine a QoS profile with the 802.1x authentication function to |
| provide the |
| passed authentication. |
| ■ Depending on the 802.1x authentication mode, dynamic QoS profile |
| application mode can be |
| default mode. |
| ■ If the traffic classification rules of a QoS profile take source information |
| (including source MAC, source IP, VLAN) as the match criterion, the QoS profile |
| cannot be applied in the |
| ■ Currently, the QoS profile function provides packet filtering, traffic policing, |
| and priority marking. |
| ■ The granularity of traffic policing is 64 kbps. If the value you input is in the |
| range of N⋅64 to (N+1)⋅64 (N is a natural number), the switch sets the value to |
| (N+1)⋅64 kbps automatically. |