SMC Networks SMC8150L2 manual Exec Commands, Command Modes

4 Command Line Interface

		Table 4-1 Command Modes
Class	Mode
Exec	Normal
	Privileged
Configuration	Global*		Access Control List
			Class Map
			Interface
			Line
			Multiple Spanning Tree
			Policy Map
			VLAN Database

*You must be in Privileged Exec mode to access the Global configuration mode.

You must be in Global Configuration mode to access any of the other configuration modes.

Exec Commands

When you open a new console session on the switch with the user name and password “guest,” the system enters the Normal Exec command mode (or guest mode), displaying the “Console>” command prompt. Only a limited number of the commands are available in this mode. You can access all commands only from the Privileged Exec command mode (or administrator mode). To access Privilege Exec mode, open a new console session with the user name and password “admin.” The system will now display the “Console#” command prompt. You can also enter Privileged Exec mode from within Normal Exec mode, by entering the enable command, followed by the privileged level password “super” (page 4-26).

To enter Privileged Exec mode, enter the following user names and passwords:

Username: admin

Password: [admin login password]

CLI session with TigerSwitch 10/100/1000 is opened.

To end the CLI session, enter [Exit].

Console#

Username: guest

Password: [guest login password]

CLI session with TigerSwitch 10/100/1000 is opened.

To end the CLI session, enter [Exit].

Console>enable

Password: [privileged level password]

Console#

4-6