Switchport acceptable-frame-types | SMC Networks SMC8150L2 specs

VLAN Commands 4

switchport acceptable-frame-types

This command configures the acceptable frame types for a port. Use the no form to restore the default.

Syntax

switchport acceptable-frame-types {all tagged} no switchport acceptable-frame-types

•all - The port accepts all frames, tagged or untagged.

•tagged - The port only receives tagged frames.

Default Setting

All frame types

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

When set to receive all frame types, any received frames that are untagged are assigned to the default VLAN.

Example

The following example shows how to restrict the traffic received on port 1 to tagged frames:

Console(config)#interface ethernet 1/1 Console(config-if)#switchport acceptable-frame-types tagged Console(config-if)#

Related Commands

switchport mode (4-170)

switchport ingress-filtering

This command enables ingress filtering for an interface.

Note: Although the ingress filtering command is available, the switch has ingress filtering

permanently set to enable. Therefore, trying to disable the filtering with the no switchport ingress-filteringcommand will produce this error message: “Note: Failed to ingress-filtering on ethernet interface !”

Syntax

switchport ingress-filtering no switchport ingress-filtering

Default Setting

Enabled

4-171

Image 413

SMC Networks SMC8150L2 Switchport acceptable-frame-types, Switchport ingress-filtering, All frame types, Switchport mode

Contents

Management Guide Page TigerSwitch 10/100/1000 Management Guide Page Contents Page Iii Page Command Line Interface Page Vii Viii Contents Page Contents Xii Appendix B Troubleshooting Appendix a Software SpecificationsGlossary Index Xiii Xiv Tables Xvi Xvii Xviii Xix Figures Figures Xxi Xxii Feature Description Key FeaturesKey Features Introduction Description of Software Features Description of Software Features Introduction Description of Software Features Function Parameter Default System DefaultsSystem Defaults Client Enabled System Defaults Function Parameter Sntp Configuration Options Connecting to the Switch Required Connections Initial Configuration Console Connection Basic ConfigurationRemote Connections Manual Configuration Setting PasswordsSetting an IP Address Dynamic Configuration Enabling Snmp Management Access Trap Receivers Configuring Access for Snmp Version 3 Clients Saving Configuration Settings Managing System Files Initial Configuration Using the Web Interface Configuring the Switch Home Navigating the Web Browser Interface Panel Display Configuration Options ActionButton Revert Apply Help System System Information Main MenuMain Menu Description ACL Configuration Allows ports to dynamically join trunks 116 STA 122 Class-of-service valueCurrent Table 131 Configuration Settings Igmp Filter/Throttling Trunk Query Igmp Filter ConfigurationConfiguration Settings 152 183 Dhcp Snooping 186 ConfigurationCache 185 Field Attributes Displaying System Information CLI Specify the hostname, location and contact information Displaying Switch Hardware/Software VersionsMain Board Management Software Switch Information Web Click System, Switch Information Displaying Bridge Extension Capabilities Bridge Extension Configuration Command Attributes Setting the Switch’s IP AddressCLI Enter the following command Manual IP Configuration Dhcp IP Configuration Using DHCP/BOOTP Managing Firmware Enabling Jumbo Frames Copy Firmware Downloading System Software from a Server 11 Deleting Files Saving or Restoring Configuration Settings 12 Downloading Configuration Settings for Startup Downloading Configuration Settings from a Server 13 Setting the Startup Configuration Settings Console Port Settings 14 Console Port Settings Telnet Settings 15 Enabling Telnet Displaying Log Messages Configuring Event Logging Error resource exhausted System Log ConfigurationCLI This example shows the event message stored in RAM Logging Levels 17 System Logs Remote Log Configuration 18 Remote Logs Simple Mail Transfer Protocol 19 Enabling and Configuring Smtp Renumbering the System Resetting the System Configuring Sntp Setting the System Clock 23 Setting the System Clock Setting the Time Zone Simple Network Management Protocol Setting Community Access StringsAccess Mode Specifying Trap Managers and Trap Types 24 Configuring Snmp Community Strings Enabling Snmp Agent Status 25 Configuring IP Trap Managers CLI This example sets an SNMPv3 engine ID Configuring SNMPv3 Management AccessSetting the Local Engine ID CLI This example specifies a remote SNMPv3 engine ID Configuring SNMPv3 UsersSpecifying a Remote Engine ID Configuring the Switch 29 Configuring SNMPv3 Users 30 Configuring Remote SNMPv3 Users Configuring Remote SNMPv3 Users Topology Change Timer immediately Configuring SNMPv3 GroupsSupported Notification Messages Subsequent to its election Rmon Events SNMPv2 Traps PD Powered Device. This notification is Private Traps SwPowerStatus 6.1.4.1.202.20.68.2.1.0.1Mode PethPsePortPower 6.1.4.1.202.20.68.2.1.0.1 ChangeTrap SwIpFilterRejectTrap 6.1.4.1.202.20.68.2.1.0.1 31 Configuring SNMPv3 Groups 32 Configuring SNMPv3 Views Setting SNMPv3 Views Configuring User Accounts User Authentication 33 Access Levels Command Usage Configuring Local/Remote Logon Authentication Tacacs Settings Radius Settings 34 Authentication Settings User Authentication Https System Support Web Browser Operating System Configuring Https Replacing the Default Secure-site Certificate Configuring the Secure Shell User Authentication SSH server includes basic settings for authentication Configuring the SSH Server Generating the Host Key Pair 37 SSH Host-Key Settings Configuring Port Security 38 Configuring Port Security Configuring 802.1X Port Authentication 802.1X protocol provides client authentication Displaying 802.1X Global Settings CLI This example shows the default global setting for Configuring 802.1X Global SettingsCLI This example enables 802.1X globally for the switch Web Click Security, 802.1X, Information Authorized Configuring Port Settings for 41 802.1X Port Configuration Consoleconfig#interface ethernet 1/2 Parameter Description Displaying 802.1X Statistics802.1X Statistics CLI This example displays the 802.1X statistics for port Access Control ListsConfiguring Access Control Lists CLI This example creates a standard IP ACL named david Setting the ACL Name and Type Configuring an Extended IP ACL Configuring a Standard IP ACL Configuring the Switch 45 Configuring Extended IP ACLs Configuring a MAC ACL This switch supports ACLs for ingress filtering only Binding a Port to an Access Control List 47 Configuring ACL Port Binding Filtering IP Addresses for Management Access 48 Creating an IP Filter List CLI This example allows Snmp access for a specific client Port ConfigurationDisplaying Connection Status Field Attributes Web Basic Information ConfigurationWeb Click Port, Port Information or Trunk Information Current Status Configuring Interface Connections 50 Port/Trunk Configuration Creating Trunk Groups 51 Configuring Static Trunks Statically Configuring a Trunk 131 Enabling Lacp on Selected Ports 52 Lacp Trunk Configuration Dynamically Creating a Port Channel Configuring Lacp Parameters 53 Lacp Port Configuration You can display statistics for Lacp protocol messages Displaying Lacp Port CountersLacp Port Counters Field Description CLI The following example displays Lacp counters 54 Lacp Port Counters Information Lacp Internal Configuration Information Displaying Lacp Settings and Status for the Local Side 55 Lacp Port Internal Information Lacp Neighbor Configuration Information Field Description Displaying Lacp Settings and Status for the Remote Side Setting Broadcast Storm Thresholds 57 Port Broadcast Control 58 Mirror Port Configuration Configuring Port Mirroring Rate Limit Configuration Configuring Rate Limits Showing Port Statistics Etherlike Statistics 10 Port Statistics Rmon Statistics Drop Events Or alignment error Received BytesResources Jabbers Formed Oversize Frames 60 Port Statistics CLI This example shows statistics for port Address Table SettingsSetting Static Addresses Displaying the Address Table 61 Configuring a Static Address Table 62 Configuring a Dynamic Address Table CLI This example sets the aging time to 300 seconds Spanning Tree Algorithm ConfigurationChanging the Aging Time Spanning Tree Algorithm Configuration 104 Displaying Global Settings 64 Displaying Spanning Tree Information Global settings apply to the entire switch Configuring Global Settings Root Device Configuration Basic Configuration of Global Settings Configuration Settings for Mstp Configuration Settings for Rstp 65 Configuring Spanning Tree Displaying Interface Settings 112 CLI This example shows the STA attributes for port 66 Displaying Spanning Tree Port Information Configuring Interface Settings CLI This example sets STA attributes for port 67 Configuring Spanning Tree per Port Configuring Multiple Spanning Trees 68 Configuring Multiple Spanning Trees MST Instance ID Instance identifier to configure. Default Displaying Interface Settings for Mstp 69 Displaying Mstp Interface Settings Configuring Interface Settings for Mstp 121 CLI This example sets the Mstp attributes for port Vlan ConfigurationIeee 802.1Q VLANs Assigning Ports to VLANs 124 Forwarding Tagged/Untagged Frames Enabling or Disabling Gvrp Global SettingCLI This example enables Gvrp for the switch Displaying Current VLANs Command Attributes WebDisplaying Basic Vlan Information 73 Displaying Current VLANs Command Attributes CLI 175 Creating VLANs CLI This example creates a new Vlan Adding Static Members to VLANs Vlan Index 130 Adding Static Members to VLANs Port Index 75 Configuring a Vlan Static Table Configuring Vlan Behavior for Interfaces 77 Configuring VLANs per Port Configuring Ieee 802.1Q Tunneling Layer 2 Flow for Packets Coming into a Tunnel Access Port Layer 2 Flow for Packets Coming into a Tunnel Uplink Port General Configuration Guidelines for QinQ Configuration Limitations for QinQ 78 802.1Q Tunnel Status Enabling QinQ Tunneling on the Switch Adding an Interface to a QinQ Tunnel CLI This example sets the switch to operate in QinQ mode 79 Tunnel Port Configuration 45-1 Enabling Private VLANs Configuring Private VLANsCLI This example enables private VLANs Protocol VLANs Configuring Uplink and Downlink PortsProtocol Vlan Group Configuration 82 Protocol Vlan Configuration Configuring Protocol Vlan Interfaces Setting the Default Priority for Interfaces Class of Service ConfigurationLayer 2 Queue Settings CLI This example assigns a default priority of 5 to port Port Priority ConfigurationMapping CoS Values to Egress Queues 11 Mapping CoS Values to Egress Queues Priority Level Traffic Type 12 CoS Priority LevelsBackground Spare Enabling CoS Selecting the Queue Mode 87 Queue Mode Setting the Service Weight for Traffic Classes Selecting IP Precedence/DSCP Priority Layer 3/4 Priority SettingsMapping Layer 3/4 Priorities to CoS Values 13 Mapping IP Precedence Mapping IP Precedence 90 Mapping IP Precedence Priority Values 14 Mapping Dscp Priority Values Mapping Dscp PriorityIP Dscp Value CoS Value 10, 12, 14 18, 20, 22 26, 28, 30, 32, 34 38, 40 92 IP Port Priority Status Mapping IP Port Priority 93 IP Port Priority Quality of Service Class map is used for matching packets to a specified class Configuring Quality of Service ParametersConfiguring a Class Map Class Map Class ConfigurationMatch Class Settings 94 Configuring Class Maps Policy Map Policy ConfigurationCreating QoS Policies Policy Options Policy Rule Settings Class Settings 95 Configuring Policy Maps Attaching a Policy Map to Ingress Queues 96 Service Policy Settings Layer 2 Igmp Snooping and Query Multicast Filtering Configuring Igmp Snooping and Query Parameters Enabling Igmp Immediate Leave 97 Igmp Configuration 98 Igmp Immediate Leave Displaying Interfaces Attached to a Multicast Router 99 Displaying Multicast Router Port Information Specifying Static Interfaces for a Multicast Router 100 Static Multicast Router Port Configuration Displaying Port Members of Multicast Services 101 IP Multicast Registration Table Assigning Ports to Multicast Services 102 Igmp Member Port Table Igmp Filtering and Throttling 103 Enabling Igmp Filtering and Throttling Enabling Igmp Filtering and Throttling Configuring Igmp Filtering and Throttling for Interfaces 104 Igmp Filter and Throttling Port Configuration Configuring Igmp Filter Profiles 105 Igmp Profile Configuration Multicast Vlan Registration General Configuration Guidelines for MVR Configuring Global MVR Settings Displaying MVR Interface Status 106 MVR Global Configuration 107 MVR Port Information Web Click MVR, Port or Trunk Information 108 MVR Group IP Information Displaying Port Members of Multicast Groups MVR Vlan Configuring MVR Interface Status Assigning Static Multicast Groups to Interfaces Web Click MVR, Port or Trunk Configuration Configuring General DNS Service Parameters Configuring Domain Name Service 111 DNS General Configuration 238 Configuring Static DNS Host to Address Entries 112 DNS Static Host Table 113 DNS Cache Displaying the DNS Cache Dhcp Snooping Web Click Dhcp Snooping, Configuration Dhcp Snooping Configuration Dhcp Snooping Information Option Configuration Dhcp Snooping Vlan ConfigurationEnables Dhcp snooping on the specified Vlan CLI This example first enables Dhcp Snooping for Vlan Trust Status Enables or disables port as trusted Dhcp Snooping Port Configuration Dhcp Snooping Binding Information 117 Dhcp Snooping Port Configuration Web Click Dhcp Snooping, Dhcp Snooping Binding Information IP Source Guard Port ConfigurationIP Source Guard 119 IP Source Guard Port Configuration Static IP Source Guard Binding Configuration Dynamic IP Source Guard Binding Information 120 Static IP Source Guard Binding Configuration Web Click IP Source Guard, Dynamic Information Switch Clustering 122 Cluster Member Choice Cluster Configuration Adds Candidate switches to the cluster as Members Cluster Member ConfigurationWeb Click Cluster, Configuration Cluster Member Information Web Click Cluster, Member ConfigurationDisplays current cluster Member switch information 126 Cluster Candidate Information Cluster Candidate Information Accessing the CLI Using the Command Line Interface Telnet Connection Command Completion Entering CommandsGetting Help on Commands Keywords and Arguments Showing Commands Using Command History Negating the Effect of CommandsUnderstanding Command Modes Partial Keyword Lookup Command Modes Exec Commands Consoleconfig-if# 120 Configuration CommandsConfiguration Modes Command Prompt Keystroke Function Command Line ProcessingCommand Line Processing Command Groups Description Command Groups Line Commands Function Mode Line Commands Line Login Username 4-25 password PasswordSyntax Password 0 7 password no password No password is specified Exec-timeout Timeout login response Syntax Password-thresh threshold no password-thresh Password-threshSyntax Exec-timeout seconds no exec-timeout Syntax Silent-time seconds no silent-time Silent-timeDatabits Syntax Parity none even odd no parity ParitySyntax Databits 7 8 no databits Stopbits SpeedSyntax Speed bps no speed Syntax Stopbits 1 Show line DisconnectSyntax Disconnect session-id Syntax Show line console vty Enable General CommandsTo show all lines, enter this command General Commands Function Mode Disable Enable password DisableEnable Level Show history Configure End Reload This example shows how to quit a CLI session This command exits the configuration programExit Quit Prompt System Management CommandsDevice Designation Commands User Access Commands Function Mode User Access CommandsHostname Username Guest Admin Enable password10 Default Login Settings Username Access-level Password Management IP Filter Commands11 IP Filter Commands Function Mode All addresses Show management 12 Web Server Commands Function Mode Web Server CommandsDefault Setting Command Mode Ip http port Syntax No ip http secure-server Default Setting Syntax No ip http server Default SettingIp http server Ip http secure-server 13 Https System Support Web Browser Operating System Ip http secure-portIp http secure-port4-31 Copy tftp https-certificate Portnumber The UDP port used for HTTPS. Range 14 Telnet Server Commands Function Mode Telnet Server CommandsIp telnet port Ip http secure-server4-30 Syntax No ip telnet server Default Setting Secure Shell Commands15 SSH Commands Function Mode Ip telnet server Copy tftp public-key Ip ssh server Syntax No ip ssh server Default Setting Syntax Ip ssh timeout seconds no ip ssh timeout Ip ssh timeoutExec-timeout4-13 show ip ssh Ip ssh crypto host-key generate 4-38 show ssh Ip ssh server-key size Ip ssh authentication-retriesKey-size- The size of server key. Range 512-896 bits Bits Ip ssh crypto host-key generate Delete public-keySyntax Delete public-key username dsa rsa Syntax Ip ssh crypto host-key generate dsa rsa Ip ssh save host-key Ip ssh crypto zeroizeSyntax Ip ssh crypto zeroize dsa rsa Syntax Ip ssh save host-key dsa rsa Show ip ssh This command displays the current SSH server connectionsShow ssh Ip ssh crypto host-key generate Syntax Show public-key user username host Show public-keyTerminology Console#show public-key host Host 17 Event Logging Commands Function Mode Event Logging CommandsSyntax No logging on Default Setting Logging on 18 Logging Levels Flash errors level 3 RAM warnings level 6Logging history Logging facility Logging hostSyntax No logging host hostipaddress Hostipaddress The IP address of a syslog server Clear logging Logging trapSyntax Logging trap level no logging trap Syntax Clear logging flash ram 19 show logging flash/ram display description Show loggingSyntax Show logging flash ram sendmail trap Logging trap command Facility commandSyntax Show log flash ram login tail Show log 21 Smtp Alert Commands Function Mode Smtp Alert CommandsLogging sendmail host Following example shows sample messages stored in RAM Syntax Logging sendmail level level Logging sendmail level Logging sendmail destination-email Logging sendmail source-emailSyntax No logging sendmail source-email email-address This example will set the source email john@acme.com Show logging sendmail Syntax No logging sendmail Default SettingLogging sendmail 22 Time Commands Function Mode Time CommandsSyntax No sntp client Default Setting Sntp client Sntp server 4-54 sntp poll 4-55 show sntp Sntp serverSyntax Sntp server ip1 ip2 ip3 Sntp client 4-53 sntp poll 4-55 show sntp Show sntp Sntp pollSyntax Sntp poll seconds no sntp poll Sntp client Calendar set Clock timezoneSyntax Calendar set hour min sec day month year month day year Show startup-config System Status CommandsThis command displays the system clock 23 System Status Commands Function Mode Command Line Interface Show running-config4-59 Show running-config Show startup-config4-57 Show users This command displays system informationShow system Show version 24 Frame Size Commands Function Mode Frame Size CommandsJumbo frame Enables support for jumbo frames Syntax No jumbo frame Default Setting 25 Flash/File Commands Function Mode Flash/File CommandsCopy Copy Flash/File Commands Following example shows how to download a configuration file Delete This command deletes a file or imageDelete unit filename Dir Delete public-key4-38 Dir Syntax Dir unit boot-rom config opcode filename26 File Directory Information Column Heading Description Boot system WhichbootSyntax whichboot unit Syntax Boot system unit boot-romconfig opcode filename Authentication Sequence Authentication CommandsDir 4-68 whichboot 27 Authentication Commands Command Group Function Local Authentication loginUsername for setting the local user names and passwords Authentication enable Radius Client 29 Radius Client Commands Function ModeShow radius-server Shows the current Radius settings Retransmit Command Mode Default Setting Auth-portRadius-server host Radius-server port Syntax Radius-server key keystring no radius-server key Radius-server keyRadius-server retransmit Show radius-server Radius-server timeout TACACS+ Client 30 Tacacs Commands Function ModeTacacs-server host Tacacs-server port Syntax Tacacs-server key keystring no tacacs-server key Tacacs-server keyShow tacacs-server 31 Port Security Commands Function Mode Port Security CommandsStatus Disabled Action None Maximum Addresses Interface Configuration Ethernet Command Usage 32 802.1X Port Authentication Command Function Mode 802.1X Port AuthenticationSyntax No dotx system-auth-control Default Setting Dot1x system-auth-control Default Command Mode Dot1x defaultDot1x max-req Dot1x port-control Single-host Dot1x operation-modeForce-authorized Dot1x timeout quiet-period Dot1x re-authenticateDot1x re-authentication Dot1x timeout tx-period Dot1x timeout re-authperiod Statistics Displays dot1x status for each port Show dot1xSyntax Show dot1x statistics interface interface Reauthentication State Machine Authenticator State MachineState Current state including initialize, reauthenticate Backend State Machine Command Line Interface 33 Access Control Lists Command Groups Function Access Control List CommandsAccess Control Lists 34 IP ACLs Command Function Mode Access-list ipSyntax No access-list ip standard extended aclname IP ACLs Access-list ip Permit, deny Ip access-group4-93 show ip access-list4-93Syntax No permit deny any source bitmask host source Standard ACL Extended ACL Any destination address-bitmask host destinationSource-port sport end destination-port dport end Ip access-group Show ip access-listSyntax Show ip access-list standard extended aclname Syntax No ip access-group aclname This command shows the ports assigned to IP ACLs Show ip access-groupShow ip access-list4-93 35 MAC ACL Commands Function Mode Access-list macSyntax No access-list mac aclname Permit, deny Mac access-group4-98 show mac access-list4-97 Permit, deny MAC ACL This command displays the rules for configured MAC ACLs Show mac access-listSyntax Show mac access-list aclname Permit, deny Mac access-group4-98 Show mac access-group Mac access-groupSyntax Mac access-group aclname Show mac access-list4-97 Show access-group Show access-list36 ACL Information Command Function Mode ACL Information 37 Snmp Commands Function Mode Snmp Commands Show snmp Syntax No snmp-server Default SettingSnmp-server Snmp-server community Snmp-server location Snmp-server contactSyntax Snmp-server contact string no snmp-server contact Syntax Snmp-server location text no snmp-server location Host Address None Notification Type Traps Snmp-server host Snmp Version UDP Port Issue authentication and link-up-down traps Snmp-server enable trapsSnmp-server enable traps Snmp-server engine-id Show snmp engine-id This command shows the Snmp engine IDThis example shows the default engine ID Snmp-server view Defaultview includes access to the entire MIB treeExamples This view includes MIB-2 Show snmp view This command shows information on the Snmp viewsSnmp-server group 39 show snmp view display description Consoleconfig#snmp-server group r&d v3 auth write daily Show snmp group 40 show snmp group display description Snmp-server user 114 41 show snmp user display description This command shows information on Snmp usersShow snmp user 42 Interface Commands Function Mode Interface CommandsInterface Port-channel channel-idRange Syntax Description string no description DescriptionSpeed-duplex Negotiation 4-118 capabilities Syntax No negotiation Default SettingNegotiation Capabilities 4-119speed-duplex4-117 Following example configures port 11 to use autonegotiationCapabilities Negotiation 4-118speed-duplex4-117 flowcontrol Syntax No flowcontrol Default SettingFlowcontrol Shutdown Syntax No shutdown Default Setting Port-channel channel-idRange Default Setting Switchport broadcast packet-rateClear counters Syntax Clear counters interface Show interfaces status This command displays the status for an interfaceFollowing example clears statistics on port Syntax Show interfaces status interface Show interfaces counters This command displays interface statisticsSyntax Show interfaces counters interface Shows the counters for all interfaces Shows all interfaces Show interfaces switchportSyntax Show interfaces switchport interface 43 Interfaces Switchport Statistics 44 Mirror Port Commands Function Mode Mirror Port CommandsPort monitor Interface ethernet unit/port source port Following shows mirroring configured from port 6 to port This command displays mirror informationShow port monitor Syntax Show port monitor interface Gigabit Ethernet 1000 Mbps Rate Limit CommandsRate-limit 46 Link Aggregation Commands Link Aggregation Commands135 123 Guidelines for Creating Trunks Channel-groupGeneral Guidelines Dynamically Creating a Port Channel Following example creates trunk 1 and then adds port Syntax No lacp Default SettingLacp 32768 Lacp system-priority Lacp admin-keyEthernet Interface Interface Configuration Port Channel Lacp admin-key Port Channel Show lacp This command displays Lacp informationLacp port-priority 47 show lacp counters display description Port Channel allType LACPDUs Illegal Pkts 48 show lacp internal display description 50 show lacp sysid display description 49 show lacp neighbors display description 51 Address Table Commands Function Mode Address Table CommandsMac-address-table static Action Mac-address- MAC address Mask Bits to match in the address Clear mac-address-table dynamicShow mac-address-table Sort Sort by address, vlan or interface Mac-address-table aging-time Show mac-address-table aging-time 52 Spanning Tree Commands Function Mode Spanning Tree Commands Syntax No spanning-tree Default Setting Spanning-tree modeSpanning tree is enabled Spanning-tree Spanning-tree forward-time Spanning-tree hello-time Spanning-tree priority Spanning-tree max-age Long method Spanning-tree pathcost method This command limits the maximum transmission rate for BPDUs Spanning-tree mst-configurationSpanning-tree transmission-limit Count The transmission limit in seconds. Range Mst vlan MST ConfigurationMst priority No mst instanceid vlan vlan-range Name Switch’s MAC addressSyntax Name name Name Name of the spanning tree Max-hops RevisionSyntax Revision number Max-hopshop-number Syntax No spanning-tree spanning-disabled Default Setting Spanning-tree spanning-disabledThis example disables the spanning tree algorithm for port Spanning-tree cost Priority The priority for a port. Range 0-240, in steps Spanning-tree port-priority Syntax No spanning-tree portfast Default Setting Syntax No spanning-tree edge-port Default SettingSpanning-tree edge-port Spanning-tree portfast Auto Spanning-tree link-typeSpanning-treeedge-port4-156 Spanning-tree mst cost Spanning-tree mst port-priority4-159 Spanning-tree mst port-priority Spanning-tree protocol-migration Port-channel channel-idRange Command ModeShow spanning-tree Syntax Spanning-tree protocol-migration interface Mstp Show spanning-tree mst configuration Gvrp and Bridge Extension Commands Vlan Commands53 VLANs Command Groups Function 54 Gvrp and Bridge Extension Commands Function Mode Show bridge-ext Syntax No bridge-ext gvrp Default SettingBridge-ext gvrp Show gvrp configuration Switchport gvrpSyntax No switchport gvrp Default Setting Syntax Show gvrp configuration interface Show garp timer Garp timer 55 Editing Vlan Groups Command Function Mode Syntax Show garp timer interfaceEditing Vlan Groups Vlan database Vlan Database Configuration By default only Vlan 1 exists and is activeVlan Show vlan 56 Configuring Vlan Interfaces Command Function Mode Configuring Vlan InterfacesInterface vlan Interface vlan Switchport acceptable-frame-types4-171 Switchport modeAll ports are in hybrid mode with the Pvid set to Vlan Switchport ingress-filtering Switchport acceptable-frame-typesSwitchport mode All frame types Switchport native vlan Switchport allowed vlan No VLANs are included in the forbidden list Switchport forbidden vlan Show vlan 57 Show Vlan Commands Function ModeDisplaying Vlan Information 58 Ieee 802.1Q Tunneling Commands Function Mode Configuring Ieee 802.1Q TunnelingGeneral Configuration Guidelines for QinQ Dot1q-tunnel system-tunnel-control Show dot1q-tunnel4-178 Show interfaces switchport Switchport dot1q-tunnel mode Related Commands Switchport dot1q-tunnel tpidThis command displays information about QinQ tunnel ports Show dot1q-tunnel Pvlan Switchport dot1q-tunnel mode59 Private Vlan Commands Function Mode No private VLANs are defined This command displays the configured private VlanShow pvlan 60 Protocol-based Vlan Commands Function Mode Configuring Protocol-based VLANsProtocol-vlan protocol-group Configuring Groups No protocol groups are mapped for any interface Protocol-vlan protocol-group Configuring InterfacesNo protocol groups are configured Syntax Show protocol-vlan protocol-group group-id Show protocol-vlan protocol-groupShow interfaces protocol-vlan protocol-group Priority Commands Layer Priority Commands61 Priority Commands Command Groups Function 62 Priority Commands Layer Function Mode Syntax Queue mode strict wrr no queue mode Queue modeSwitchport priority default Queue bandwidth Queue bandwidth weight1...weight4 no queue bandwidthWeights 1, 2, 4, 8 are assigned to queues 0-3 respectively Queue cos-mapqueueid cos1 ... cosn no queue cos-map 63 Default CoS Values to Egress QueuesQueue cos-map Following example shows how to change the CoS assignments Show queue modeThis command shows the current queue mode Show queue bandwidth This command shows the class of service priority map Priority Commands Layer 364 Priority Commands Layer 3 Function Mode Show queue cos-map 65 IP Dscp to CoS Vales IP Dscp Value CoS Value Syntax No map ip dscp Default SettingMap ip dscp dscp-value cos cos-value no map ip dscp Syntax Show map ip dscp interface This command shows the IP Dscp priority mapShow map ip dscp Quality of Service Commands 199 Input of a particular interface Show class-map 66 Quality of Service Commands Function Mode198 Service-policy Match Class-mapSyntax No class-map class-map-namematch-any Show class map No policy-mappolicy-map-name Class Map ConfigurationPolicy-map No class class-map-name Policy Map ConfigurationClass Set Policy Map Class Configuration Drop out-of-profile packets PoliceSyntax No police rate-kbpsburst-byteexceed-action drop set Syntax No service-policy input policy-map-name Service-policyShow class-map Syntax Show class-map class-map-name Show policy-map interface Show policy-mapShow policy-mappolicy-map-name class class-map-name Displays all policy maps and all classes Igmp Snooping Commands Multicast Filtering Commands67 Multicast Filtering Commands Command Groups Function 68 Igmp Snooping Commands Function Mode Following example enables Igmp snooping Syntax No ip igmp snooping Default SettingIp igmp snooping Ip igmp snooping vlan static Syntax No ip igmp snooping leave-proxy Default Setting Following configures the switch to use Igmp VersionIp igmp snooping version Ip igmp snooping leave-proxy Interface Configuration Vlan Syntax No ip igmp snooping immediate-leave Default SettingThis command shows the Igmp snooping configuration Ip igmp snooping immediate-leave Show mac-address-table multicast Following shows the current Igmp snooping configurationThis command shows known multicast addresses 69 Igmp Query Commands Layer Function Mode Igmp Query Commands LayerSyntax No ip igmp snooping querier Default Setting Ip igmp snooping querier Ip igmp snooping query-interval Following shows how to configure the query count toTimes Ip igmp snooping query-max-response-time4-208 Ip igmp snooping router-port-expire-time Seconds The report delay advertised in Igmp queries. RangeIp igmp snooping query-max-response-time 70 Static Multicast Routing Commands Function Mode Static Multicast Routing CommandsIp igmp snooping vlan mrouter Syntax No ip igmp snooping vlan vlan-idmrouter interface Show ip igmp snooping mrouter Displays multicast router ports for all configured VLANsSyntax Show ip igmp snooping mrouter vlan vlan-id Multicast router port types displayed include Static 71 Igmp Filtering and Throttling Commands Function Mode Igmp Filtering and Throttling CommandsSyntax No ip igmp filter Default Setting 213 Ip igmp profile Syntax Permit deny Default SettingPermit, deny Syntax No ip igmp profile profile-number Syntax No ip igmp filter profile-number RangeNo range low-ip-address high-ip-address Syntax Ip igmp max-groups number No ip igmp max-groups Ip igmp max-groups Show ip igmp filter Ip igmp max-groups actionSyntax Ip igmp max-groups action replace deny Syntax Show ip igmp filter interface interface Show ip igmp throttle interface Show ip igmp profileSyntax Show ip igmp profile profile-number Syntax Show ip igmp throttle interface interface 72 Multicast Vlan Registration Commands Function Mode Multicast Vlan Registration CommandsPort Port number. Range Port-channelchannel-id Range 219 No mvr group ip-address count vlan vlan-id Command Line Interface Mvr Global Configuration Multicast Filtering Commands Mvr Interface Configuration 220 73 show mvr display description Show mvrSyntax Show mvr interface interface members ip-address Members 74 show mvr interface display description75 show mvr members display description 76 IP Interface Commands Function Mode IP Interface CommandsIp address 224 Syntax Ip default-gateway gateway no ip default-gateway Ip default-gatewayGateway IP address of the default gateway Following example defines a default gateway for this device This command displays the settings of an IP interface This command submits a Bootp or Dhcp client requestIp dhcp restart Show ip interface This command has no default for the host Ip default-gateway4-224Show ip redirects Ping Ip source-guard IP Source Guard Commands77 IP Source Guard Commands Function Mode Syntax Ip source-guard sip sip-macno ip source-guard No configured entries This example enables IP source guard on portIp source-guard binding No ip source-guard binding mac-addressvlan vlan-id Show ip source-guard This command shows the source guard binding tableShow ip source-guard binding Ip source-guard4-227 ip dhcp snooping Ip dhcp snooping vlan 78 Dhcp Snooping Commands Function Mode Dhcp Snooping CommandsSyntax No ip dhcp snooping Default Setting Ip dhcp snooping 232 This example enables Dhcp snooping for Vlan This example enables Dhcp snooping globally for the switchIp dhcp snooping vlan Ip dhcp snooping vlan 4-233 ip dhcp snooping trust Ip dhcp snooping trust Syntax No ip dhcp snooping trust Default Setting Ip dhcp snooping information option This example enables MAC address verificationIp dhcp snooping verify mac-address Replace This example enables the Dhcp Snooping Information OptionIp dhcp snooping information policy 79 Switch Cluster Commands Function Mode Switch Cluster CommandsShow ip dhcp snooping Show ip dhcp snooping binding Displays current cluster Candidates in the network 242 Syntax No cluster Default SettingCluster Syntax No cluster commander Default Setting Cluster commanderCluster ip-pool Syntax Cluster ip-pool ip-addressno cluster ip-pool Syntax Rcommand id member-id RcommandMember-id- The ID number of the Member switch. Range Cluster member This command shows the current switch cluster members This command shows the switch clustering configurationShow cluster Show cluster members Show cluster candidates Software Features Appendix a Software Specifications Groups 1, 2, 3, 9 Statistics, History, Alarm, Event Management FeaturesStandards Igmp RFC 1112 IGMPv2 RFC 2236 RADIUS+ RFC Management Information Bases a Management Information Bases Software Specifications Symptom Action Table B-1 Troubleshooting Chart Using System Logs Boot Protocol Bootp Access Control List ACLClass of Service CoS Differentiated Services Code Point Service Dscp Generic Attribute Registration Protocol Garp Garp Vlan Registration Protocol GvrpGeneric Multicast Registration Protocol Gmrp Group Attribute Registration Protocol Garp Igmp Query Igmp SnoopingInternet Group Management Protocol Igmp In-Band Management Port Authentication Multicast SwitchingRemote Authentication Dial-in User Service Radius Network Time Protocol NTP Simple Network Management Protocol Snmp Secure Shell SSHSimple Network Time Protocol Sntp Spanning Tree Algorithm STA XModem Virtual LAN Vlan Numerics Index Index Gateway, default 3-14,4-224 Index-3 Index-4 Page Technical Support