Show mvr interface display description

The following displays information about the interfaces attached to the MVR VLAN:

Console#show mvr interface				Immediate Leave
Port	Type		Status	Immediate Leave
-------	--------	-------------		---------------
eth1/1	SOURCE		ACTIVE/UP	Disable
eth1/2	RECEIVER		ACTIVE/UP	Disable
eth1/5	RECEIVER		INACTIVE/DOWN	Disable
eth1/6	RECEIVER		INACTIVE/DOWN	Disable
eth1/7	RECEIVER		INACTIVE/DOWN	Disable
Console#
		Table 4-74 show mvr interface - display description

Field			Description

Port			Shows interfaces attached to the MVR.

Type			Shows the MVR port type.

Status			Shows the MVR status and interface status. MVR status for source ports is
			“ACTIVE” if MVR is globally enabled on the switch. MVR status for receiver
			ports is “ACTIVE” only if there are subscribers receiving multicast traffic from
			one of the MVR groups, or a multicast group has been statically assigned to
			an interface.
Immediate Leave			Shows if immediate leave is enabled or disabled.

The following shows information about the interfaces associated with multicast groups assigned to the MVR VLAN:

Console#

	Table 4-75 show mvr members - display description
Field	Description
MVR Group IP	Multicast groups assigned to the MVR VLAN.

Status	Shows whether or not the there are active subscribers for this multicast group. Note that
	this field will also display “INACTIVE” if MVR is globally disabled.
Members	Shows the interfaces with subscribers for multicast services provided through the MVR
	VLAN. Also shows if an interface has dynamically joined a multicast group (d), or if a
	multicast group has been statically bound to the interface (s).

4-222

SMC Networks SMC8150L2 manual show mvr interface display description, Members