SNMP Commands 4

 

Table 4-40 show snmp group - display description

Field

 

Description

groupname

 

Name of an SNMP group.

 

 

 

security model

 

The SNMP version.

 

 

 

readview

 

The associated read view.

 

 

 

writeview

 

The associated write view.

 

 

 

notifyview

 

The associated notify view.

 

 

 

storage-type

 

The storage type for this entry.

 

 

 

Row Status

 

The row status of this entry.

 

 

 

snmp-server user

This command adds a user to an SNMP group, restricting the user to a specific SNMP Read, Write, or Notify View. Use the no form to remove a user from an SNMP group.

Syntax

snmp-server user username groupname [remote ip-address] {v1 v2c v3 [encrypted] [auth {md5 sha} auth-password[priv des56 priv-password]]

no snmp-server user username {v1 v2c v3 remote}

username - Name of user connecting to the SNMP agent. (Range: 1-32 characters)

groupname - Name of an SNMP group to which the user is assigned. (Range: 1-32 characters)

remote - Specifies an SNMP engine on a remote device.

ip-address- The Internet address of the remote device.

v1 v2c v3 - Use SNMP version 1, 2c or 3.

encrypted - Accepts the password as encrypted input.

auth - Uses SNMPv3 with authentication.

md5 sha - Uses MD5 or SHA authentication.

auth-password- Authentication password. Enter as plain text if the encrypted option is not used. Otherwise, enter an encrypted password. (A minimum of eight characters is required.)

priv des56 - Uses SNMPv3 with privacy with DES56 encryption.

priv-password- Privacy password. Enter as plain text if the encrypted option is not used. Otherwise, enter an encrypted password.

4-113

Page 355
Image 355
SMC Networks SMC8150L2 manual Snmp-server user, show snmp group display description