SMC Networks SMC8150L2 manual Show system, Show users, This command displays system information

System Management Commands 4

show system

This command displays system information.

Default Setting

None

Command Mode

Normal Exec, Privileged Exec

Command Usage

•For a description of the items shown by this command, refer to “Displaying System Information” on page 3-10.

•The POST results should all display “PASS.” If any POST test indicates “FAIL,” contact your distributor for assistance.

Example
Console#show system
System Description: TigerSwitch 10/100/1000 26/50 PORT MANAGED SWITCH
System OID String: 1.3.6.1.4.1.202.20.68
System Information
System Up Time:	0 days, 0 hours, 1 minutes, and 32.18 seconds
System Name:	[NONE]
System Location:	[NONE]
System Contact:	[NONE]
MAC Address (Unit1):	00-00-35-28-10-03
Web Server:	Enabled
Web Server Port:	80
Web Secure Server:	Enabled
Web Secure Server Port:	443
Telnet Server:	Enable
Telnet Server Port:	23
Jumbo Frame:	Disabled
POST Result:
DUMMY Test 1	PASS
UART Loopback Test	PASS
DRAM Test	PASS
Timer Test	PASS
Switch Int Loopback Test	PASS
Done All Pass.
Console#

show users

Shows all active console and Telnet sessions, including user name, idle time, and IP address of Telnet client.

Default Setting

None

Command Mode

Normal Exec, Privileged Exec

4-61