The KVMADMIN utility
Particularly useful for complex Wizard IP Plus configurations and the control of remote installations, KVMADMIN is a powerful administration tool.
KVMADMIN is based upon the successful VNC viewer and uses the same security system. Rather than a graphical interface such as the standard viewer, KVMADMIN uses command line control to provide the following administration facilities:
•Discover and adjust the Wizard IP Plus configuration, including host systems,
•Save and restore the Wizard IP Plus configuration,
•Set user names and passwords,
•Download the event log,
•Set custom video modes.
The use of KVMADMIN is strictly limited to the ‘admin’ user and for security purposes it is not possible to retrieve user names or passwords from the Wizard IP Plus.
To use KVMADMIN you require the IP address and admin password of the Wizard IP Plus unit. The command line is as follows:
kvmadmin <command> <ip address> [<parameters>]
where <command> is one of the following:
•
•
•
•
•
•
•
For instance, the command line:
kvmadmin -getconfig kvm1.cfg 192.168.2.1
... downloads the current configuration from the Wizard IP Plus unit at the given address and stores it in the local file kvm1.cfg.
Whereas the command line:
kvmadmin -setusers users.csv 192.168.2.1
... configures the usernames and passwords for the same unit from the local file users.csv.
For more information about KVMADMIN, please refer to the user notes supplied with the utility.
®
25
