Appendix 8 – Hotkey sequence codes

These codes are used when defining hotkey switching sequences (macros) for host computers and allow you to include almost any of the special keys on the keyboard.

Permissible key presses

Main control keys (see ‘Using abbreviations’)

Backspace Tab Return Enter Ctrl Alt Win Shift LShift RShift LCtrl RCtrl LAlt AltGr RAlt LWin RWin Menu Escape Space CapsLock NumLock PrintScreen Scrolllock

Math operand keys (see ‘Using abbreviations’)

Add (Plus) Subtract (Minus) Multiply

Central control keys (see ‘Using abbreviations’)

Insert Delete Home End PageUp PageDown

Up Down Left Right Print Pause

Keypad keys (see ‘Using abbreviations’)

KP_Insert KP_Delete KP_Home KP_End KP_PageUp

KP_PageDown KP_Up KP_Down KP_Left KP_Right KP_Enter KP_Add KP_Subtract KP_Divide KP_Multiply

KP_0 to KP_9

Function keys

F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12

ASCII characters

All characters can be entered using their ASCII codes, from 32 to 126 (i.e. A,B,C,

1,2,3 etc.) with the exception of the special characters ‘+’, ‘-’, ‘+–’ and ‘*’ which have special meanings, as explained below.

Codes with special meanings

+means press down the key that follows

– means release the key that follows

+– means press down and release the key that follows

*means wait 250ms (note: if a number immediately follows the asterisk, then the delay will equal the number, in milliseconds)

Note: Hotkey sequences are not case sensitive.

Creating macro sequences

Hot key macro sequences can be up to 256 characters long. All keys are assumed to be released at the end of a line, however, you can also determine that a key is pressed and released within a sequence. Any of the following three examples will send a command that emulates and a press and release of the Scroll Lock key:

+SCROLL-SCROLL +-SCROLL +SCROLL-

Example:

+-SCROLL+-SCROLL+1+ENTER

Press and release scroll twice, press 1 then enter then release all keys (equivalent definition is +SCROLL-SCROLL+SCROLL-SCROLL+1+ENTER-1-ENTER)

Using abbreviations

To reduce the length of the key definitions, any unique abbreviation for a key can be used. For example: “scroll”, “scr” and even “sc” all provide an identifiable match for “ScrollLock” whereas “en” could not be used because it might mean “Enter” or “End” (“ent” would be suitable for “Enter”).

Note: Hotkey sequences and abbreviations are not case sensitive.

For information about where to enter these codes, please see the sections Host configuration or Keyboard control.

®

   



68

Page 69
Image 69
Black Box ServSwitchTM manual Appendix 8 Hotkey sequence codes, Permissible key presses, Creating macro sequences