Network configuration
This page allows you to configure the various aspects of the IP port and its relationship with the local network.
Wizard IP Plus Network Config
MAC | Address | 00:0F:58:00:00:04 | ||||||
Use | DHCP | No |
| |||||
IP | Address | 192.168.42.154 |
|
| ||||
Net | Mask | 255.255.255.0 |
|
| ||||
Gateway |
|
|
|
|
| |||
VNC | Port | 5900 |
|
|
|
| ||
HTTP Port | 80 |
|
|
|
| |||
|
|
|
|
|
|
|
| |
|
| Clear IP | Access Control | |||||
|
|
|
|
|
|
|
| |
Save |
|
|
|
| Cancel | |||
To get here
1Use the local keyboard and log on as the ‘admin’ user.
2Press 
(hotkeys may be different).
3Select ‘Configuration’.
4Select ‘Network configuration’.
®
MAC Address
Media Access Control address – this is the unique and unchangeable code that was hard coded within your Wizard IP Plus unit when it was built. It consists of six
Use DHCP
DHCP is an acronym for ‘Dynamic Host Configuration Protocol’. Its function is particularly useful when connecting to medium size or larger networks, such as the Internet. When this option is selected, your Wizard IP Plus will attempt to locate a DHCP server on the network. If such a server is located, it will supply three things to the Wizard IP Plus: an IP address, an IP network mask (also known as a Subnet mask) and a Gateway address. These are not usually granted permanently, but on a ‘lease’ basis for a fixed amount of time or for as long as the Wizard IP Plus remains connected and switched on. Discover allocations.
IP Address
This is the identity of the Wizard IP Plus within a network. The IP address can be thought of as the telephone number of the Wizard IP Plus. Unlike the MAC address, the IP address can be altered to suit the network to which it is connected. It can either be entered manually or configured automatically using the DHCP option. When the DHCP option is enabled, this entry is greyed out.
Net Mask
Also often called the
Gateway
This is the address of the device that links the local network (to which the Wizard IP Plus is connected) to another network such as the Internet. Usually this is a network switch or router and it will be used whenever a device to be contacted lies outside the local network.
VNC Port
This is the logical link through which communications with a remote VNC viewer will be channelled (see What is a port?). The default setting is 5900 which is
a widely recognised port number for use by VNC software. However, in certain circumstances it may be advantageous to alter this number - see Security issues with ports for more details.
Note: The VNC port and HTTP port can be set to the same port number in order to simplify router and firewall configuration. If this is done then the Wizard IP Plus will “listen” for both types of traffic on the single port.
HTTP Port
This is the logical link through which communications with a remote web browser will be channelled. The default setting of 80 is an established standard for web (HTTP – HyperText Transfer Protocol) traffic though this can be changed to suit your local network requirements.
Clear IP Access Control
This option removes all entries from the IP access control feature within the Wizard IP Plus. The IP access control feature (configurable by a remote admin user) allows certain network address ranges to be denied access to the Wizard IP Plus. If set incorrectly, it is possible to exclude all network users and so this option provides an emergency recovery point.
42
