Unit configuration
This page provides access to a selection of both basic and fundamental settings for the Wizard IP Plus.
Wizard IP Plus Unit Config
Hardware | Rev | 1 |
|
|
|
|
|
|
|
|
| |||||
Firmware | 1.0 |
|
|
|
|
|
|
|
|
|
|
| ||||
Keybd | Layout |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| UK |
|
|
|
|
|
|
|
|
|
|
| ||||
Admin | Passwd |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Unit | Name |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Hot Keys |
| Ctrl+Alt |
|
|
|
|
| |||||||||
Screensaver |
| 10 | mins |
|
|
|
|
|
|
| ||||||
Time |
|
|
| 21 | : | 27 | : | 31 |
|
|
|
| ||||
Date |
|
|
| 15 |
|
| Apr |
|
|
| 2004 |
| ||||
Encryption |
| Prefer Off |
|
|
|
|
| |||||||||
Video | Source |
| Digital |
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Save |
|
|
|
|
|
|
|
|
|
|
| Cancel | ||||
To get here
1Use the local keyboard and log on as the ‘admin’ user.
2Press 
(hotkeys may be different).
3Select ‘Configuration’.
4Select ‘Unit configuration’.
®
Keybd Layout
Use the arrow buttons to match the keyboard layout expected by the host system.
Admin Password
Enter the password that will be used to gain administrator access to the Wizard IP Plus. There can only be one admin user and only that user is given access to the configuration menus. The admin password background will be red until a reasonably secure password has been entered, although this is only advisory as any password or no password may be entered.
Unit Name
The name entered here will be displayed on the local menus and the remote VNC/browser windows.
Hot Keys
Use the left and right arrow keys to select an appropriate hot key sequence for the locally connected keyboard. This sequence is used in combination with other keypresses to access the
Screensaver
Use the left and right arrow keys to select an appropriate period of inactivity on the local keyboard or mouse before a screensaver is displayed and the user is logged out. This setting applies to local users only and once the screensaver is displayed, for security purposes the user is required to log in again. The timeout period can be selected between 5 minutes and 1 day (24 hours), it cannot be disabled. Note: The Idle timeout option serves a similar purpose for remote connections.
Time and Date
Use the left and right arrow keys to select the correct time and date. The time entry uses the 24 hour clock notation. The internal real time clock will continue to run for roughly one week without power to the Wizard IP Plus, after that
it will be lost and require resetting. Use the up and down arrow keys to move between each of the sections within the time and date entries.
Encryption
Three options are available: Always on, prefer off, prefer on. The one to choose depends on the specific details of your installation - see Encryption settings for details. The use of encryption imposes a slight performance overhead of roughly 10% but is highly secure against third party intrusion.
Video Source
Determines the DDC video monitor information that is sent to the host computer. The host computer’s video controller will use this information to determine how it should alter its output to suit a digital or analogue monitor. The Wizard IP Plus performs automatic conversion between both video signal types.
41
