Clear IP access control
This option removes all entries from the IP access control feature within the Wizard IP Plus.
What is IP access control?
The IP access control feature (configurable by a remote admin user) allows certain network address ranges to be denied access to the Wizard IP Plus. If set incorrectly, it is possible to exclude all network users and so this option provides an emergency recovery point.
To clear IP access control
1Use the local keyboard and log on as the ‘admin’ user.
2Press 
(hotkeys may be set differently).
3Select ‘Configuration’.
®
4Select ‘Network configuration’.
5Highlight the ‘Clear IP
access control’ option and press 
.
Wizard IP Plus Network Config
MAC | Address | 00:0F:58:00:00:04 | ||||||
Use | DHCP | No |
| |||||
IP | Address | 192.168.42.154 |
|
| ||||
Net | Mask | 255.255.255.0 |
|
| ||||
Gateway |
|
|
|
|
| |||
VNC | Port | 5900 |
|
|
|
| ||
HTTP Port | 80 |
|
|
|
| |||
|
|
|
|
|
|
|
| |
|
| Clear IP | Access Control | |||||
|
|
|
|
|
|
|
| |
Save |
|
|
|
| Cancel | |||
45
