SMC Networks SMC8150L2 manual Configuring SNMPv3 Users

Simple Network Management Protocol 3

Web – Click SNMP, SNMPv3, Users. Click New to configure a user name. In the New User page, define a name and assign it to a group, then click Add to save the configuration and return to the User Name list. To delete a user, check the box next to the user name, then click Delete. To change the assigned group of a user, click Change Group in the Actions column of the users table and select the new group.

Figure 3-29 Configuring SNMPv3 Users

CLI – Use the snmp-server user command to configure a new user name and assign it to a group.

Console(config)#snmp-server user chris group r&d v3 auth md5
greenpeacepriv des56 einstien	4-113
Console(config)#exit
Console#show snmp user	4-113

EngineId: 83010000030000352810030000

User Name: chris

Authentication Protocol: md5Privacy Protocol: des56

Storage Type: nonvolatile

Row Status: active

Console#

3-39