SMC Networks SMC8150L2 manual Range, No range low-ip-address high-ip-address

Multicast Filtering Commands 4

•When the access mode is set to permit, IGMP join reports are processed when a multicast group falls within the controlled range. When the access mode is set to deny, IGMP join reports are only processed when a multicast group is not in the controlled range.

Example

Console(config)#ip igmp profile 19

Console(config-igmp-profile)#permit

Console(config-igmp-profile)#

range

This command specifies multicast group addresses for a profile. Use the no form to delete addresses from a profile.

Syntax

[no] range low-ip-address [high-ip-address]

•low-ip-address - A valid IP address of a multicast group or start of a group range.

•high-ip-address - A valid IP address for the end of a multicast group range.

Default Setting

None

Command Mode

IGMP Profile Configuration

Command Usage

Enter this command multiple times to specify more than one multicast address or address range for a profile.

Example

Console(config)#ip igmp profile 19

Console(config-igmp-profile)#range 239.1.1.1

Console(config-igmp-profile)#range 239.2.3.1 239.2.3.100

Console(config-igmp-profile)#

ip igmp filter (Interface Configuration)

This command assigns an IGMP filtering profile to an interface on the switch. Use the no form to remove a profile from an interface.

Syntax

[no] ip igmp filter profile-number

profile-number- An IGMP filter profile number. (Range:1-4294967295)

Default Setting

None

4-213