SMC Networks SMC8150L2 manual User Access Commands, Username, Syntax Hostname name no hostname

System Management Commands 4

Example

Console(config)#prompt RD2

RD2(config)#

hostname

This command specifies or modifies the host name for this device. Use the no form to restore the default host name.

Syntax

hostname name no hostname

name - The name of this host. (Maximum length: 255 characters)

Default Setting

None

Command Mode

Global Configuration

Example

Console(config)#hostname RD#1

Console(config)#

User Access Commands

The basic commands required for management access are listed in this section. This switch also includes other options for password checking via the console or a Telnet connection (page 4-10),user authentication via a remote authentication server (page 4-70),and host access authentication for specific ports (page 4-81).

Table 4-9 User Access Commands

Command	Function	Mode	Page
username	Establishes a user name-based authentication system at login	GC	4-25
enable password	Sets a password to control access to the Privileged Exec level	GC	4-26

username

This command adds named users, requires authentication at login, specifies or changes a user's password (or specify that no password is required), or specifies or changes a user's access level. Use the no form to remove a user name.

Syntax

username name {access-level level nopassword password {0 7} password}

no username name

4-25