SMC Networks SMC8150L2 manual System Status Commands, Show calendar, Show startup-config

System Management Commands 4

Default Setting

None

Command Mode

Privileged Exec

Example

This example shows how to set the system clock to 15:12:34, April 1st, 2004.

Console#calendar set 15 12 34 1 April 2004

Console#

show calendar

This command displays the system clock.

Default Setting

None

Command Mode

Normal Exec, Privileged Exec

Example

Console#show calendar 15:12:43 April 1 2004

Console#

System Status Commands

Table 4-23 System Status Commands

Command	Function	Mode	Page
show startup-config	Displays the contents of the configuration file (stored in flash	PE	4-57
	memory) that is used to start up the system
show running-config	Displays the configuration data currently in use	PE	4-59
show system	Displays system information	NE, PE	4-61
show users	Shows all active console and Telnet sessions, including user	NE, PE	4-61
	name, idle time, and IP address of Telnet clients
show version	Displays version information for the system	NE, PE	4-62

show startup-config

This command displays the configuration file stored in non-volatile memory that is used to start up the system.

Default Setting

None

Command Mode

Privileged Exec

4-57