SMC Networks SMC8150L2 manual Displaying Lacp Port Counters, Field Description

3 Configuring the Switch

CLI – The following example configures LACP parameters for ports 1-4. Ports 1-4 are used as active members of the LAG.

Console(config)#interface ethernet 1/1				4-116
Console(config-if)#lacp		actor system-priority 3		4-133
Console(config-if)#lacp		actor admin-key 120		4-134
Console(config-if)#lacp		actor port-priority 128		4-136
Console(config-if)#exit
.
.
.
Console(config)#interface ethernet 1/4
Console(config-if)#lacp		actor system-priority 3
Console(config-if)#lacp		actor admin-key 120
Console(config-if)#lacp		actor port-priority 512
Console(config-if)#end
Console#show lacp sysid		Priority	System MAC Address	4-136
Port Channel	System

-------------------------------------------------------------------------

1	3	00-12-CF-31-31-31
2	32768	00-12-CF-31-31-31
3	32768	00-12-CF-31-31-31
4	32768	00-12-CF-31-31-31

Console#show lacp 1 internal 4-136

Port channel : 1

-------------------------------------------------------------------------

Oper Key : 120

Admin Key : 0 Eth 1/1

-------------------------------------------------------------------------

LACPDUs Internal:		30 sec
LACP System Priority:		3
LACP	Port Priority:	128
Admin Key:		120
Oper	Key:	120

Admin State : defaulted, aggregation, long timeout, LACP-activity

Oper State:	distributing, collecting, synchronization,
.	aggregation, long timeout, LACP-activity
.
.

Displaying LACP Port Counters

You can display statistics for LACP protocol messages.

	Table 3-7 LACP Port Counters
Field	Description
LACPDUs Sent	Number of valid LACPDUs transmitted from this channel group.
LACPDUs Received	Number of valid LACPDUs received on this channel group.
Marker Sent	Number of valid Marker PDUs transmitted from this channel group.
Marker Received	Number of valid Marker PDUs received by this channel group.

3-86