SMC Networks SMC8150L2 manual Secure Shell Commands, Ip telnet server, SSH Commands Function Mode

System Management Commands 4

ip telnet server

This command allows this device to be monitored or configured from Telnet. Use the no form to disable this function.

Syntax

[no] ip telnet server

Default Setting

Enabled

Command Mode

Global Configuration

Example

Console(config)#ip telnet server

Console(config)#

Related Commands

ip telnet port (4-32)

Secure Shell Commands

The Berkley-standard includes remote access tools originally designed for Unix systems. Some of these tools have also been implemented for Microsoft Windows and other environments. These tools, including commands such as rlogin (remote login), rsh (remote shell), and rcp (remote copy), are not secure from hostile attacks.

The Secure Shell (SSH) includes server/client applications intended as a secure replacement for the older Berkley remote access tools. SSH can also provide remote management access to this switch as a secure replacement for Telnet. When a client contacts the switch via the SSH protocol, the switch uses a public-key that the client must match along with a local user name and password for access authentication. SSH also encrypts all data transfers passing between the switch and SSH-enabled management station clients, and ensures that data traveling over the network arrives unaltered.

This section describes the commands used to configure the SSH server. However, note that you also need to install a SSH client on the management station when using this protocol to configure the switch.

Note: The switch supports both SSH Version 1.5 and 2.0.

Table 4-15 SSH Commands

Command	Function	Mode	Page
ip ssh server	Enables the SSH server on the switch	GC	4-35
ip ssh timeout	Specifies the authentication timeout for the SSH server	GC	4-36
ip ssh	Specifies the number of retries allowed by a client	GC	4-37
authentication-retries
ip ssh server-key size	Sets the SSH server key size	GC	4-37

4-33