SMC Networks SMC8150L2 manual Renumbering the System, Resetting the System

3 Configuring the Switch

CLI – Enter the host ip address, followed by the mail severity level, source and destination email addresses and enter the sendmail command to complete the action. Use the show logging command to display SMTP information.

Renumbering the System

Web – Click System, Renumber. Click the Renumber button to renumber the switch. When prompted, confirm that you want to renumber the switch.

Figure 3-20 Renumbering the System

CLI – Use the reload command to restart the switch. When prompted, confirm that you want to reset the switch.

Console#reload	4-22
System will be	restarted, continue <y/n>? y

When restarting the system, it will always run the Power-On Self-Test.

Console(config)#logging sendmail host 192.168.1.19 Console(config)#logging sendmail level 3 Console(config)#logging sendmail source-email bill@this-company.com Console(config)#logging sendmail destination-email ted@this-company.com

Console(config)#logging sendmail Console#

Resetting the System

Web – Click System, Reset. Click the Reset button to reboot the switch. When prompted, confirm that you want reset the switch.

Figure 3-21 Resetting the System

CLI – Use the reload command to restart the switch. When prompted, confirm that you want to reset the switch.

Console#reload	4-22
System will be	restarted, continue <y/n>? y

Note: When restarting the system, it will always run the Power-On Self-Test.

3-30