SMC Networks SMC8150L2 manual Command Groups Description

Command Groups 4

Command Groups

The system commands can be broken down into the functional groups shown below.

Table 4-4 Command Groups

Command Group	Description	Page
Line	Sets communication parameters for the serial port and Telnet,	4-10
	including baud rate and console time-out
General	Basic commands for entering privileged access mode, restarting the	4-19
	system, or quitting the CLI
System Management	Controls system logs, system passwords, user name, browser	4-24
	management options, and a variety of other system information
Flash/File	Manages code image or switch configuration files	4-64
Authentication	Configures logon access using local or remote authentication;	4-70
	also configures port security and IEEE 802.1X port access control
Access Control List	Provides filtering for IP frames (based on address, protocol, or TCP/	4-89
	UDP port number) or non-IP frames (based on MAC address or
	Ethernet type)
SNMP	Activates authentication failure traps; configures community access	4-100
	strings, and trap managers; also configures IP address filtering
Interface	Configures the connection parameters for all Ethernet ports,	4-116
	aggregated links, and VLANs
Mirror Port	Mirrors data to another port for analysis without affecting the data	4-127
	passing through or the performance of the monitored port
Rate Limiting	Controls the maximum rate for traffic transmitted or received on a port	4-129
Link Aggregation	Statically groups multiple ports into a single logical trunk; configures	4-130
	Link Aggregation Control Protocol for port trunks
Address Table	Configures the address table for filtering specified addresses, displays	4-140
	current entries, clears the table, or sets the aging time
Spanning Tree	Configures Spanning Tree settings for the switch	4-144
VLANs	Configures VLAN settings, and defines port membership for VLAN	4-163
	groups; also enables or configures private VLANs and protocol VLANs
Class of Service	Sets port priority for untagged frames, selects strict priority or weighted	4-184
	round robin, relative weight for each priority queue, also sets priority for
	TCP/UDP traffic types, and DSCP
Quality of Service	Configures Differentiated Services	4-197
Multicast Filtering	Configures IGMP multicast filtering, query parameters, specifies ports	4-201
	attached to a multicast router, and enables multicast VLAN registration
IP Interface	Configures IP address for the switch	4-223
DHCP Snooping	Configures DHCP snooping	4-231
IP Source Guard	Configures IP source guard security	4-227
IP Cluster	Configures switch clustering	4-237

4-9