Extron electronic DMP 44 LC manual Ex#Cv

Command	ASCII Command			Response	Additional Description
	(Host to Tuner)			(Tuner to Host)
Setup Commands
Set verbose mode	EX#CV }			Vrb X#]	Set verbose/response mode.
					0 = clear
					1 = verbose
					2 = tagged responses
					3 = verbose + tagged
					responses
View verbose mode	E CV }			X# ]	View verbose mode
Set unit name	EX&  }			X&]	Set the unit name.
			CN	Ipn •
Set unit name to factory default	E		}	X*]	Set unit name to factory
		• CN		Ipn •	default.
Bidirectional Serial Data Port
Configure parameters	EX$CP }			Ccp X$ ]	X$ = baud rate:
					0 = 9600
					1 = 19200
					2 = 38400 (default)
	E CP }			Ccp X$ ]	3 = 15200
View parameters					View baud rate.

ZAP Commands (Factory Defaults) and RAM Commands

Delete all presets and names	E ZG }	Zpg ]
Delete individual preset	E X1) ZG}	Zpg X1) ]
System reset (factory default)	E ZXXX }	Zpx ]
Absolute system reset	E ZQQQ }	Zpq ]
Commit only RAM to Flash	E 2FF }	Nvr X^ ] (responds when
		done)
Query whether RAM needs to	E FF }	X^ ]
be saved to Flash

Delete all presets and names. Delete specific preset.

Reset system to factory default.

Similar to system reset.

X^ =

0 = RAM has been saved

1 = RAM has not been saved

Name commands

Write preset name	E X1) , name NG}	Nmg X1)  , name ]	Write preset name.
Read preset name	E X1) NG }	Vrb mode 0/1:	Read preset name.
		name ]
		Vrb mode 2/3:
		Nmg X1) , name ]
Write input name	E X1@ , name NI}	Nmi X1@ , name ]	Write input name.
Read input name	E X1@ NI}	Vrb mode 0/1:	Read input name.
		name ]
		Vrb mode 2/3:
		Nmi X1@ , name ]
Write output name	E X1# , name NO}	Nmo X1# , name ]	Write output name.
Read output name	E X1# NO }	Vrb mode 0/1:	Read output name.
		name ]
		Vrb mode 2/3:
		Nmo X1# , name ]

DMP 44 LC • SIS Programming and Control 43