Extron electronic DMP 44 LC manual Filter Block Dialog Box

Filter Block

Each line input channel filter block allows a total of five filters.

The first filter is inserted from a processor list that appears when the block is

double‑clicked or via a context window/processor list when the block is right‑clicked. After the processor is inserted, double-clicking opens the setup dialog box.

Figure 8. Filter Block Dialog Box

Additional filters are inserted by opening the filter block dialog box, then selecting a filter type from the drop-down filter selection list. All filter parameters are modified via the Filter block dialog box. Each filter loads with all applicable default parameters displayed to the right of each drop-down filter selection list.

DMP 44 LC • Operation 17