Extron electronic manual DMP 44 LC Hardware Reset Modes, DMP 44 LC Reset Mode Summary

DMP 44 LC Hardware Reset Modes

DMP 44 LC Reset Mode Summary

Use Factory Firmware

Mode	Mode Activation	Result	Purpose/Notes
1	Hold the reset button while	The DMP 44 LC reverts to the	This mode reverts to the
	applying power.	factory default firmware.	factory default firmware
	NOTE: After a mode 1 reset,	Event scripting does not start if the	version if incompatibilty
		DMP 44 LC is powered on in this	issues arise with user-
	update the DMP 44 LC	mode. All user files and settings	loaded firmware.
	firmware to the latest	(drivers, adjustments, IP settings,	NOTE: User-defined
	version. DO NOT	etc.) are maintained.
	operate the firmware	NOTE: If you do not want to	Web pages
	version that results from		may not work
	this mode reset.	update the firmware, or	correctly
		perform a mode 1 reset	if using
		by mistake, cycle power	an earlier
		to the DMP 44 LC to	firmware
		return to the firmware	version.
		version running prior to
		the reset.

Reset to Factory Defaults

5Press and hold the Reset button for about 9 sec. until the Power LED blinks three times (once at 3 sec., again at 6 sec., again at 9 sec.), then release and within 1 second press Reset momentarily (< 1 sec.).

NOTE: The reset procedure is

aborted if the second

momentary press does

not occur within one second.

Mode 5 performs a complete reset to factory defaults, except for firmware:

•Does everything mode 4 reset does.

•All mix-points set muted and set to 0 dB.

•All outputs unmuted and set to

0 dB.

•DSP processing returned to defaults and bypassed.

•All inputs muted and set to

0 dB.

•All presets and group master memory cleared.

Useful to start over with configuration or uploading, and to replace events.

DMP 44 LC • Reference Information 74