Extron electronic DMP 44 LC manual Previewing/Recalling a Preset, Preset Preview

Saved presets can be recalled via the DSP Configurator, or a control system sending an SIS preset recall command. Presets may also be saved and recalled via the embedded web page. Presets saved via the web page contain input gain, output volume, and the primary mix-point settings.

Previewing/Recalling a Preset

A preset can be previewed in either Live or Emulate mode by selecting the preset from the presets drop-down list.

Figure 32. Preset Preview

The program indicates a view-only preset configuration by displaying each preset element with a translucent green mask over the block. In the example, the input processors are included in Preset 1 - Input Procs.

Behavior for previewing and applying presets is as follows:

•Live Mode — After selecting a preset, DSP Configurator displays the preset elements that will be affected by a preset recall with a translucent mask over the element, and leaves all other DSP Configurator elements unaltered. Elements without a translucent mask represent elements in the current state that will be unaffected by a preset recall. Real-time changes to the current state will not be reflected in the GUI while previewing a preset, and the user cannot alter GUI elements. To apply the preset, the user clicks Recall. The preset reverts to “Current State.”

•Emulate Mode — After selecting a preset from the list, DSP Configurator displays the elements that will be affected by a preset recall with a green translucent mask, leaving all other elements (which represent the current emulation) unaltered. The user clicks Recall to apply the viewed preset to the current emulation. The preset number reverts to “Current Emulation.”

DMP 44 LC • Software Control 60