Extron electronic DMP 44 LC manual ED X6%*X6^GRPM

Command	ASCII Command	Response	Additional Description
	(Host to Tuner)	(Tuner to Host)

Audio group master commands

NOTE: • See Group Masters, for more information about audio group masters.

• A group must have assigned members for these commands to have an effect.

• For X6^, a positive (+) value is assumed unless a negative (-) value is specified.

• If entering a X6^ value outside the valid range for the group or outside the soft limits, the DMP 44

responds with an “invalid parameter” (E13) error.

• X6^, X6&, and X6* values can be sent without leading zeroes; responses are always 5 digits.

Set a group fader control	ED X6%*X6^GRPM}				Grpm X6%*X6^]	Set the group fader to a value of
						X6^.
Example:	ED2*-293GRPM}				GrpmD02*-	Set the group 2 fader control to
					00293GRPM]	-29.3 dB.
Raise a group fader control	ED X6%*X6&+GRPM}				Grpm X6%*X6^]	Increase the level of the X6%
						group fader by X6& dB.
Example	ED2*30+GRPM}				GrpmD02*-	Raise the group 2 fader 3 dB
					00263*GRPM]	(from -29.3 dB to -26.3 dB,
						starting from the level set in
						the “Set a group fader control”
						example, above.
Lower a group fader control	ED X6%*X6&-GRPM}				Grpm X6%*X6^ ]	Decrease the level of the X6%
						group fader by X6& dB.
View the group fader control	ED X6%GRPM}				Grpm X6%*X6^ ]	In verbose modes 1 and 2, the
level						response is simplified to X6^].
Mute a group mute control	ED X6%*1GRPM}				GrpmD X6%*+00001]	Mute all blocks in group X6%.
Clear (unmute) a group mute	ED X6%*0GRPM}				GrpmD X6%*+00000 ]	Umute all blocks in group X6%.
control
View a group mute control	ED X6%GRPM}				GrpmD X6%*X6$ ]	For group masters, X6$ is always
						expressed as a positive or negative
						5-digit value.
Set soft limits	EL X6% X6*upper		*	X6*lower	GrpmL X6%*X6**X6* ]	Set the groups soft limits to X6*
	GRPM}	*				and X6*.
Example:	EL2*+60*-60GRPM}				GrpmL2*+00060*	Set the upper soft limit for the
					-00060 ]	group 2 fader to +6.0 dB and the

lower limit to -6.0 dB.

View soft limits	EL X6%GRPM}
View group type	EP X6%GRPM}
View group members	EO X6%GRPM}

GrpmL X6%*X6**X6* ]

GrpmP X6%*X6( ]

GrpmOX6%*X6)1*X6)2*

...*X6)16 ]

In verbose modes 0 and 1, the response is simplified to

X6**X6* ].

Show the group type (X6() for group X6%. In verbose modes 0 and 1, the response is simplified

to X6( ].

X6) is the control or mix point. In verbose modes 0 and 1, the response is simplified to

X6)1*X6)2*...*X6)16].

DMP 44 LC • SIS Programming and Control 49