Extron electronic manual Ducker Configuration Dialog, DMP 44 LC • Operation

Ducking is configured in a window which opens when an active ducking processor block is double-clicked (see the following diagram). Ducking can be globally set up from a single configuration window, which opens when any of the active ducking processor blocks are double-clicked. When a ducking processor block is inserted, it is automatically set to Enable Source Mic/Line. All inactive ducking processor blocks have Enable Source Mic/Line unchecked by default.

1 5

2

36

4

Figure 16. Ducker Configuration Dialog

Any of the four inputs can be ducking sources. Any or all of the remaining inputs can be targets.

DMP 44 LC • Operation 30