■PRINTING COMMANDS (CENTRONICS STANDARD INTERFACE)
Name | Command | Contents |
|
|
|
Carriage return | LF, CR | Prints buffer data and return the line. |
|
|
|
Double width print set | SO | Sets the double width character. |
|
|
|
DC2, DC3 | Reduces the power consumption during standing | |
|
| by. |
|
|
|
Double width print reset | DC4 | Resets the double with character. |
|
|
|
ESC sequence entry | ESC | Indicates the start of an escape sequence formed |
|
| by this code plus subsequent commands. |
|
|
|
Line space set | ESC A + n | Sets the line space length in 2 × (0 to 255 dot |
|
| lines). |
|
|
|
Paper feed set in normal direction | ESC B + n | Sets the paper feed in normal direction. |
|
| (Feeding range: 2 × (0 to 255 dot lines)) |
|
|
|
Bit image print set | ESC K +n1+n2+n3 | Sets the bit image printing in single or double |
|
| density mode. |
|
|
|
International character set | ESC R+n | Selects the international characters. |
|
|
|
Download character register | ESC &+n1+n2+~ | Registers the download characters of 12 × 6 or 16 |
|
| × 8 dots. |
|
|
|
Printing quality set | ESC Q+n+SP*+~ | Sets the printing quality conforming to used paper. |
|
|
|
Printing density set | ESC Q+n+!+A | Sets the printing density mode. |
|
| (Single density standard, reduced or double |
|
| density) |
|
|
|
Paper feed set in reverse direction | ESC j+n | Sets the paper feed in reverse direction. |
|
| (Feeding range: 2 × (1 to 255 dot lines)) |
|
|
|
Character grade set | ESC x+n | Sets the character grade in standard or high |
|
| grade. |
|
|
|
Special character print set | ESC ¥+n | Prints the special character. |
|
|
|
Start position set for | ESC 1+n | Sets the print start position of |
|
| left end. |
|
|
|
Detecting function set | ESC 9+n | Sets the detecting function. |
|
|
|
Mark detection | ESC FF | Feeds the paper to the marking position. |
|
|
|
Line feed length set after mark detection | ESC w+n | Sets the line feed length after mark detection. |
|
|
|
Automatic paper loading length set | ESC EM+n | Sets paper feeding length for automatic paper |
|
| loading. |
|
|
|
Automatic printing speed set | ESC s+n | Sets the function mode in the automatic printing |
|
| speed set. |
|
|
|
Printer initialization | ESC @ | Initializes the printer MPU. |
|
|
|
Notes:
*: “SP” means the space code (20H).
Bus interface uses different commands.
11