Fujitsu FTP-633MCL400 manual Designation, General Specifications

FTP-633MCL400/FTP-623DCL002

■ DESIGNATION

	Item	Part number
Printer mechanism		FTP-633MCL400*
Interface board		FTP-623DCL002
LSI	Micro Controller Unit	FTP-623CU001
	Gate Array	FTP-633GA101

*: Rear paper insertion type is available: FTP-633MCL402

■ GENERAL SPECIFICATIONS

Item				Specifications
Printing method	Thermal-sensitive line dot method
Dot structure	512 dots/line
Dot pitch (Horizontal)	0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical)	0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area	64 mm
	(1) Single density			Standard mode		HS mode 1. to 3.
						HQ mode
Printing mode				Reduced mode		HS mode 1. to 3.
	(2) Double density mode					HQ mode
	Approximately 24 character lines/s (480 dotlines/s = 60 mm/s)
Maximum printing speed	[1ply, 8 columns of “H”, double density, 7.2 V, 1/10” line returns]
	Approximately 16 character lines/s (416 dotlines/s = 52 mm/s)
	[1ply, 12 columns of “H”, double density, 7.2 V, 1/8” line returns]
	JIS ANK	: 128	ASCII		:	31
Character types	Semi-graphic	: 36	International characters : 130
	Special	: 30	Download		:	8
Character grade mode	Standard character (12 × 6 dot font)/High grade character (16 × 8 dot font)
Character composition, dimensions (H×W),	Single density standard		: 24 × 12 dots, (3.0 × 1.5 mm), 42 columns
				32 × 16 dots, (4.0 × 2.0 mm), 32 columns
Number of columns (standard)	Single density reduced*1 :			24 × 12 dots, (3.0 × 1.5 mm), 42 columns
				32 × 16 dots, (4.0 × 2.0 mm), 32 columns
	Double density		:	16 ×	8 dots, (2.0 × 1.0 mm), 64 columns
Interface	1) Centronics standard			2) Bus interface*2
						(Continued)

2