Extron electronic DXP DVI PRO manual # B, # Z, Mut X X ... Xn, Mute Commands

Command	ASCII Command	Response	Additional Description
	(Host to Switcher)	(Switcher to Host)
Mute Commands

Video mute	X#*1B	Vmt X#*1]
Video unmute	X#*0B	Vmt X#*0]
View individual video mute	X# B	X$]
Global video mute	1*B	Vmt1]
Global video unmute	0*B	Vmt0]
Audio mute	X#*1Z	Amt X#*1]
Audio unmute	X#*0Z	Amt X#*0]
View individual audio mute	X# Z	X$]
Global audio mute	1*Z	Amt1]
Global audio unmute	0*Z	Amt0]
View output mutes	E VM}	X( X( ... X(n]
		In verbose mode 2
		or 3:
		Mut X( X( ... X(n]
Example:	E VM}	Mut01002300]
DXP DVI Pro 88

Mute Output X# video (video off).

Unmute Output X# video (video on).

View mute status X$ for video Output X#.

Mute all video outputs.

Unmute video for all outputs.

Mute audio for Output X# (audio off).

Unmute audio for Output X# (audio on).

View audio mute status X$ for Output X#.

Mute audio for all outputs.

Unmute all audio outputs.

Each X( response is the mute status of an output, starting from Output 1.

n = the maximum number of outputs for this model. Output 2 video, Output 5 audio, and Output 6 video and audio are muted. All other outputs are unmuted.

NOTE: The Mut portion of the response appears only when the switcher is in verbose mode 2 or 3 (see the Set

verbose mode command on page 70).

Save, Recall, and Directly Write Global and Room Presets

NOTES: • If you try to recall a preset that is not saved, the matrix switcher responds with the error code E11.

•If the room is nonexistent, the matrix switcher responds with the error code E21.

•The following characters are invalid or not recommended in preset names:

+~ , ` @ = [ ] { } < > ‘ ’ “ ” ; : \ ? and {space}

Save current configuration as	X&,	Spr X&]	Save the current configuration
a global preset			as preset X&. The command
			character is a comma.

Example:	9,	Spr09]
Recall a global preset	X&.	Rpr X&]

Save current ties as preset 9.

Recall global preset X&. The command character is a period.

Example:	5.	Rpr05]	Recall preset 5, which
			becomes the current

configuration.

NOTE: X# = Output number	1	– maximum number of outputs for your model
X$ = Mute status for individual output	0	= unmuted, 1 = muted
X& = Global preset number	00 – 32. 00 = current configuration
X( = Audio and video mute status for	For each output:
all outputs (VM command)	0	= no signals muted, 1 = video only muted, 2 = audio only muted,
	3	= video and audio both muted

DXP DVI, DXP DVI Pro, and DXP HDMI Series • SIS Configuration and Control 58