Extron electronic DXP DVI PRO manual Pop-up Field Providing Formation About a Button Tie

Models: DXP DVI DXP DVI PRO

1 137
Download 137 pages 18.49 Kb
Page 126
Image 126
Figure 116. Pop-up Field Providing Formation About a Button Tie

Figure 116. Pop-up Field Providing Formation About a Button Tie

To tie an input to all outputs, click that input number, located at the left of the matrix.

2.Click the Take button to make the configuration changes or Cancel button to abandon the changes.

Input Adjustments — Contains an HDCP Authorized check box for each input. For the desired input, select this check box to turn on HDCP authorization or clear the box to turn authorization off. By default, HDCP authorization is set to On for all inputs.

NOTE: If the source requires HDCP authentication, ensure that HDCP authorization is set to On (the default).

Output Adjustments — Contains an AV Mute button for each output. To mute or unmute an output:

1.In the Signal Type section, select the signal that you want to mute by clicking the Video Only, Audio Only, or Video & Audio button. A color fill is added to the selected signal type button: Video Only is filled with green, Audio Only, red, and

Video & Audio, amber.

2.Click the Mute button to the right of the desired output number. The selected button label changes to Muted and its background becomes the color of the signal type button selected in step 1.

To unmute an output, click its Muted button. The button label changes to Mute and the color fill is removed.

EDID Configuration — Contains the following:

Save Output 1 section: If desired, you can save the EDID for the output device connected to the DXP output 1 (only) as a user-assigned EDID, by clicking one of the User buttons (numbered User 1 through User 4). After you save the EDID of Output 1 as a user-assigned EDID, you can select it from the EDID menu for any input.

EDID menus: For each input, there is a drop-list of EDIDs (including user-assigned), from which you can select the resolution and refresh rate to assign to the input.

(If you select a User Assigned option for which no EDID has been specified, the default 720p @ 60 Hz is applied to the input.)

DXP DVI, DXP DVI Pro, and DXP HDMI Series • HTML Operation 120

Page 126
Image 126
Extron electronic DXP DVI PRO manual Pop-up Field Providing Formation About a Button Tie