Extron electronic DXP DVI PRO manual Example 7 Grouping Inputs and Outputs, Clear All Selections

Example 7: Grouping Inputs and Outputs

In the following example, several switcher inputs and outputs are assigned to groups. The steps show the front panel indications that result from your actions.

1.Press and release the Esc button.

Press the Esc button to clear all selections.

C O N T R O L

ENTER PRESET VIEW ESC

The button blinks once.

Figure 47. Clear All Selections

2.To enter I/O group mode, press and hold the Input 1 and Output 1 buttons until all buttons that are not grouped light green (approximately 2 seconds).

Release the Input 1 button and Output 1 button.

Ungrouped input and output buttons light.

INPUTS INPUTS

Press and hold the Input 1 and Output 1 buttons.

1	2	3	4	5	6	7	8	1	2	3	4	5	6	7	8
								2 seconds
1	2	3	4	5	6	7	8	1	2	3	4	5	6	7	8
			OUTPUTS								OUTPUTS

Figure 48. Select I/O Group Mode

3.Press and release the Enter button to select group 1.

Press and release the Enter button to select group 1.

The button lights to indicate the selection.

	C O N T R O L
ENTER	PRESET	VIEW	ESC

Group #: 1 2 3 4

Figure 49. Select I/O Group 1

DXP DVI, DXP DVI Pro, and DXP HDMI Series • Operation 34