Extron electronic DXP DVI PRO manual Ties Shown as Crosspoints

•Ties as Crosspoints — Displays ties as a matrix of inputs and outputs. Current ties that have been made are indicated by amber boxes.

•To create a tie, click in a crosspoint box. A + sign appears briefly in the box you clicked, indicating a tie has been formed.

•To break a tie, click on the desired amber (tied) box. A – sign appears briefly and the amber fill is cleared from the box.

Figure 97. Ties Shown as Crosspoints

•Signal-detection options — Provides a submenu that allows you to set the input signal detection (DSVP) feature to do one of the following:

•Automatically refresh the display every 10 seconds.

•Sample the sync and update the display whenever you make a configuration change (On Demand or by Refresh).

•Never sample and display the sync or no sync status (None).

•Limit ties to same group — Allows you to create ties only between inputs and outputs that are in the same group (similar to front panel operation).

•Icons in I/O boxes — Displays icons that you place in the I/O boxes in the matrix window (see figure 96 on the previous page).

DXP DVI, DXP DVI Pro, and DXP HDMI Series • Matrix Software 97