Extron electronic DXP DVI PRO Example 2 Adding a Tie to a Set of Video Ties, Clear All Selections

Example 2: Adding a Tie to a Set of Video Ties

In the following example, a new tie is added to the current configuration. The illustrations show the front panel indications that result from your actions.

NOTE: This example assumes that you have performed example 1.

1.Press and release the Esc > button.

Press the Esc button to clear all selections.

C O N T R O L

ENTER PRESET VIEW ESC

The button blinks once.

Figure 19. Clear All Selections

2.To select only video for the tie, press and release the Video and Audio buttons as necessary until the Video button is lit and the Audio button is off.

I / O

VIDEO AUDIO

Press the Video button to toggle video on. Press the Audio button to toggle audio off.

The button lights green when selected. The button is unlit or background illuminated when deselected.

Figure 20. Select Video Only

3.Press and release the Input 5 button.

Press and release the Input 5 button.

The button lights green to indicate that video outputs can be tied to or untied from this input.

The Output 3, Output 4, and Output 8 buttons light green to indicate the video ties created in example 1.

INPUTS

1 2 3 4 5 6 7 8

1 2 3 4 5 6 7 8

OUTPUT

Figure 21. Select an Input with Ties

4.Press and release the Output 1 button.

Press and release the Output 1 button. The button blinks green to indicate that the selected video input will be tied to this output.

1	2	3	4	5	6	7	8	CONTROL
								ENTER PRESET	VIEW	ESC
			OUTPUT

The Enter button blinks green to indicate the need to confirm the change.

Figure 22. Select an Additional Output

DXP DVI, DXP DVI Pro, and DXP HDMI Series • Operation 22