Extron electronic DXP DVI PRO manual SIS Commands for DXP, Symbol Definitions for DXP

SIS Commands for DXP

Symbol Definitions for DXP

] = Carriage return and line feed

}or ¦ = Carriage return (no line feed)

• = Space

E or W = <Escape> key

NOTE: Input and output numbers in commands may be entered as either one-digit, two- digit, or three-digit numbers. All input and output numbers are reported as two-digit numbers in the response.

X!	=	Input number	1	– maximum number of inputs for your model
X@	=	Input number (for ties)	0	– maximum number of inputs for your model
			(0 = untied)

X# X$

X%

X^

=	Output number	1	– maximum number of outputs for your model
=	Lock mode, power,	0	= lock mode 0, not OK, or unmuted
	supply or individual	1	= lock mode 1, OK, or muted
	mute status	2	= lock mode 2
= Group number (for I/O		1 through 4 groups
	grouping)	0	= no group
= Room number (for room		10 maximum. Each room can have up to 10 room
	presets)	presets (X*) assigned.

NOTE: A room is a subset of operator-selected outputs that relate to each other. The DXP switchers support up to 10 rooms, each of which can consist of from 1 to 16 outputs.

X&	=	Global preset number	00	– 32 (00 = current configuration)
X*	=	Room preset number	00	– current ties for the room in view mode, 10
				maximum

NOTE: A room preset is a stored configuration with all of the outputs assigned to a single room. When a room preset is retrieved from memory, it becomes the current configuration.

X(	= All video and audio mute		0	= no signals muted
		status	1	= video muted
			2	= audio muted
			3	= video and audio muted
X1)	=	HDCP status	0	= No input or output is connected.
			1	= Input or output is connected and is not HDCP
				compliant.
			2	= Input or output is connected and is HDCP
				compliant.
X1!	=	Connection status	0	= no input connected
			1	= input connected
X1#	=	Name	12 characters maximum for input, output, and global
			preset names
			11 characters maximum for room names
			Upper- and lowercase letters are valid.
NOTE: The following characters are invalid or not recommended in the name:
		{space} ~ , @ = ` [ ] { } < > ‘ ’ “ ” ; : \ + and ?
X1$	=	Total inputs	Total number of inputs for this switcher
X1%	=	Total outputs	Total number of outputs for this switcher

DXP DVI, DXP DVI Pro, and DXP HDMI Series • SIS Configuration and Control 54