Extron electronic DXP DVI PRO manual Input connectors, DVI Connector Pin Assignments

NOTE: Figure 5 on the previous page shows a DXP 88 HDMI, with eight HDMI input connectors and eight HDMI output connectors. The rear panels of the other three DXP HDMI models are identical to this model except for the number of inputs and outputs:

•DXP HDMI 84 – 8 inputs and 4 outputs

•DXP HDMI 48 – 4 inputs and 8 outputs

•DXP HDMI 44 – 4 inputs and 4 outputs

AAC power connector — Plug a standard IEC power cord into this connector to connect the switcher to a 100 VAC to 240 VAC, 50-60 Hz power source.

BInput connectors —

•DVI and DVI Pro series: Connect DVI-D source devices to these female 29-pin DVI-I input connectors. Only single-link DVI-D signals are supported.

Pin	Signal	Pin	Signal	Pin	Signal
1	TMDS data 2–	9	TMDS data 1–	17	TMDS data 0–
2	TMDS data 2+	10	TMDS data 1+	18	TMDS data 0+
3	TMDS data	11	TMDS data 1/3	19	TMDS data 0/5
	2/4 shield		shield		shield
4	Not used	12	Not used	20	Not used
5	Not used	13	Not used	21	Not used
6	DDC clock	14	+5 V power	22	TMDS clock
					shield
7	DDC data	15	Ground	23	TMDS clock+
8	Not used	16	Hot plug	24	TMDS clock–
			detect

1 8

9 17 24

Female DVI Connector

Figure 6. DVI Connector Pin Assignments

• HDMI series: Connect HDMI source devices to these female 19-pin type A HDMI input connectors.

Pin	Signal	Pin	Signal	Pin	Signal
1	TMDS data 2+	7	TMDS data 0+	13	CEC	1		19
2	TMDS data 2	8	TMDS data 0	14	Reserved
	shield		shield		(NC on device)
3	TMDS data 2–	9	TMDS data 0–	15	SCL	2		18
								HDMI
4	TMDS data 1+	10	TMDS clock+	16	SDA
							Type A Connector
5	TMDS data 1	11	TMDS clock	17	DDC/CEC
	shield		shield		ground
6	TMDS data 1–	12	TMDS clock–	18	+5 V power
				19	Hot plug
					detect

Figure 7. HDMI Connector Pin Assignments

DXP DVI, DXP DVI Pro, and DXP HDMI Series • Installation 8