Extron electronic DXP DVI + X& P X@*X#!X@*X# % X@*X#$...X@*X#, +X& Po, X1# X ,X# ,X# , ...X# n

Command	ASCII Command			Response	Additional Description
	(Host to Switcher)			(Switcher to Host)
Save, Recall, and Directly Write Global and Room Presets (continued)
Save current configuration as	X^*X*,			Rm X^•SprX*]	Save the current configuration
a room preset					as preset X* for room X^.
					The command character is a
					comma.
Example:	3*9,			Rm03•Spr09]	Save current ties as preset 9
					for room 3.
Directly write a	E + X& P X@*X#!X@*X# % X@*X#$...X@*X#&}
global preset
				Spr X&]	The tie all (!), tie RGB (&),
					tie video (%), and tie audio ($)
					commands are all valid.
Example:
		Esc	+27P1*5!5*2$3*6%3*8&
				Spr27]	Brackets are shown to separate

ties for clarity only. Create global preset 27, which ties video and audio Input 1 to Output 5, audio Input 5 to Output 2, video Input 3 to Output 6, and video Input 3 to Output 8.

NOTE: The direct write of a global preset should always be preceded by a clear global preset ties command of that same preset number, as shown below. In a directly-written preset, the tied input for each output position (or no tied input) remains unchanged unless overwritten or cleared.

If you do not clear the ties in a global preset number before you directly write a global preset to that number, ties that are part of the previous version of the specified preset with the same number can become part of the newly-created preset.

Clear a global preset	E+X& PO*!}	Spr X&]	Clear all ties in preset X&.
Example:	E+27P0*!}	Spr27]	Clear all ties in preset 27.
Write room outputs	E X^,X#,X#,...X#n MR}
		Mpr X^,X#,X#,...X#n]
			Assign outputs to room X^.
			See the notes below.

NOTES: • A room can contain a maximum of 16 outputs.

•An output can belong to only one room.

•The maximum number of rooms (X^) is 10.

•If no room name is assigned (see the Names commands on page 63), the default name is

“Room #X^ • X#1,• X#2,• X#3.”

Example:	E 8,3,4,5,6MR}	Mpr8,3,4,5,6]	Outputs 3, 4, 5, and 6 are
			assigned to room 8.
Read room outputs	E X^ MR}	X1# X^,X#,X#,...X#n]
			Display the outputs assigned
			to room X^.
Example:	E 3MR}	Class1,1,2,6,8]	Outputs 1, 2, 6, and 8 are
			assigned to room 3, which is
			named “Class 1.”

NOTE: X@ = Input number (for ties)	0	– maximum number of inputs for your model
X# = Output number	1	– maximum number of outputs for your model
X^ = Room number (for room presets)	Each room can have up to 10 presets (X*) assigned.
X& = Global preset number	00		– 32. 00 = current preset
X* = Room preset number	00		– current ties for the room in view mode, 10 maximum
X1# = Room name	11 characters maximum for room names. Upper- and lowercase

letters are valid.

DXP DVI, DXP DVI Pro, and DXP HDMI Series • SIS Configuration and Control 59