LIST OF MAIN PARTS
1.Rocker Switch for Laser Guide
2.On/Off Trigger Switch
3.Locking Button
4.Dust Output /Vacuum Adapter
5.Hex Key Storage
6.Cutting Mode Selector
7.Guide Plate
8.Safety Guard
9.Laser Guide
10.Laser Battery Compartment
TECHNICAL SPECIFICATIONS:
Item Number | |
Model Number | |
Rating Voltage | 120 VAC |
Frequency | 60Hz |
Amp | 5.5A |
No load speed | 500~3000/SPM |
Gross Weight | 5 lbs. |
Cutting depth | Wood Max. 2 3/8 |
Capacities | inch. (60mm) |
| Steel Max 3/16 |
| inch. (5mm) |
Cutting Angles | 45 Degrees Left |
| 90 Degrees |
| 45 Degrees Right |
Laser Specifications:
Class II Laser Product
Rating Voltage | 3 VDC |
Average Power | <1.0Mw |
Wave Length | 650nm |
Battery Type | AAA |
Number of Batteries | 2 |
CONTENTS OF PACKAGING
Check all loose parts from the box with the list below. Assemble according to the instructions on the following pages.
a.Jig Saw w/Laser
b.Wood Cutting blade
c.Vacuum Adapter
d.2 AAA 1.5v Batteries (already in Laser Battery Compartment)
e.Hex Key (all ready in Hex Key Storage)
f.Instruction Manual
If any of the above items are missing, please contact our service department at
6
