Extron electronic DXP DVI PRO manual Saving and Recalling Presets, Example 5 Saving a Preset

Saving and Recalling Presets

The current configuration (0) can be saved as a preset in any one of 32 preset memory addresses. Preset locations are assigned to the input buttons and (where necessary) output buttons. Up to 16 presets can be selected from the front panel to be either saved or retrieved (16 additional presets can be selected via the control software, SIS commands, or the web pages). When a preset is retrieved from memory, it becomes the current configuration.

NOTES: • Presets cannot be viewed from the front panel unless recalled as the current

configuration. Presets can be viewed using the Matrix Switchers Control program (see the “Matrix Software” section, beginning on page 72, for more details).

•The current configuration and all presets are stored in non-volatile memory.

When power is removed and restored, the current configuration is still active and all presets are retained.

•When a preset is recalled, it replaces the current configuration, which is lost unless it is also stored as a preset. The recalled preset overwrites all of the current configuration ties in favor of the preset ties.

•All models have 32 presets; however, only up to 16 presets (the number of front panel buttons) can be selected from the front panel. Preset numbers greater than 16 can be accessed under serial port or Ethernet control.

Preset Preset Preset Preset Preset Preset						Preset Preset
1	2	3	4	5	6	7	8

			INPUTS
1	2	3	4	5	6	7	8
1	2	3	4	5	6	7	8
			OUTPUTS

Preset Preset		Preset Preset Preset Preset Preset Preset
9	10	11	12	13	14	15	16

NOTE: Presets 17 through 32 are available via

RS-232/RS-422 and Ethernet control only.

Figure 37. Preset Locations for All DXP Models

Example 5: Saving a Preset

In the following example, the current configuration is saved as a preset. The steps show the front panel indications that result from your actions.

1.Press and release the Esc button.

Press the Esc button to clear all selections.

C O N T R O L

ENTER PRESET VIEW ESC

The button blinks once.

Figure 38. Clear All Selections

DXP DVI, DXP DVI Pro, and DXP HDMI Series • Operation 29