Extron electronic DXP DVI PRO manual Set e-mail events for recipient

Command	ASCII Command	Response	Additional Description
	(Host to Switcher)	(Switcher to Host)
IP Setup Commands (continued)
Set e-mail events for recipient	E X4# X4!,X4$,X4% EM}	Ipe X4# X4!*X4$*X4% X4%...X4%]

Example:

Set DHCP on or off Read DHCP on/off status Set serial port parameters

Read serial port parameters Configure receive timeout Read receive timeout

Set mode Read mode

Set verbose mode Read verbose mode Configure current port timeout Read current port timeout Configure global IP port timeout Read global IP port timeout

	You must first have set an
	e-mail recipient for the e-mail
	account number (X4!), using
	the separate Set e-mail
	recipient (CR) command.
E I72,0,3EM}	IpeI72*0*33333333]
	E-mail account #72
	(recipient 8), JSmith, will
	receive fail/missing and
	fixed and restored messages
	for all inputs.
E X4^ DH}	Idh X4^]
E DH}	X4^]
E X4&*X4*,X4(,X5),X5! CP}
	Cpn X4&•Ccp X4*,X4(,X5),X5!]
E X4& CP}	X4*,X4(,X5),X5!]
E X4&*X5$,X5% CE}	Cpn X4&•Cce X5$,X5%]
E CE }	X5$,X5%]
E X4&*X5@ CY}	Cpn X4&•Cty X5@]
E X4& CY}	X5@]
E X5# CV}	Vrb X5#]
E CV}	X5#]
E 0*X5^ TC}	Pti0*X5^]
E 0TC}	X5^]
E 1*X5^ TC}	Pti1*X5^]
E 1TC}	X5^]

DXP DVI, DXP DVI Pro, and DXP HDMI Series • SIS Configuration and Control 71