Extron electronic DXP DVI PRO manual If X4# = I, then, If X4# = F, then, If X4# = P, then

X4$	=	Notification selections, part 2	If X4# = I, then:		X4$	= 0 (all inputs) or 1 through 8
					(input 1 through input 8)
			If X4# = F, then:		X4$	= 00 (all fans)
			If X4# = P, then:		X4$	= 00 (both power supplies)
X4%	=	Notify when?	0	= no response
			1 = fail or missing
			2	= fixed or restored
			3	= both 1 and 2
			4	= suspend
X4^	= DHCP		0	= off, 1 = on
X4&	=	Port number	01 through 99 (two ASCII characters)
X4*	=	Baud rate	9600, 19200, 38400, 115200 (default = 9600)
X4(	=	Parity	odd, even, none, mark, space (Only the first letter is
			required. Default = none.)
X5)	=	Data bits	7, 8 (default = 8)
X5!	=	Stop bits	1, 2 (default = 1)
X5@	=	Port type	0	= RS-232
			1	= RS-422
X5#	=	Verbose mode	0	= clear/none (default for Telnet connection)
			1	= verbose mode (default for RS-232 or RS-422
				connection)
			2	= tagged responses for queries
			3	= verbose mode and tagged for queries

NOTE: If tagged responses is enabled (modes 2 and 3), all read commands return the constant string and the value as the set command does (for example, the read matrix name command ECN}, returns Ipn•X3)]).

X5$

X5%

X5^

= Port timeout interval	1 (= 10 seconds) through 65000
(in 10 second increments)	(Default is 30 = 300 seconds = 5
minutes)

=Time (in 10 ms increments) to wait 10 (= 100 ms, default) through 32767 for characters

= Time (in 10 ms increments) to wait 2 (= 20 ms, default) through 32767 between characters

DXP DVI, DXP DVI Pro, and DXP HDMI Series • SIS Configuration and Control 69